Linksys WPC54GX4 manual Wireless Security Screen

Page 34

Wireless-G Notebook Adapter with SRX400

4.The Wireless Security screen will appear.

If your wireless network doesn’t use wireless security, select Disabled and then click the Next button to continue. Proceed to Step 5.

From the Security drop-down menu, select the security method you want to use: WEP, WPA Personal, WPA2 Personal, WPA Enterprise, or RADIUS. WEP stands for Wired Equivalent Privacy, and WPA uses a security standard stronger than WEP encryption. RADIUS stands for Remote Authentication Dial-In User Service. Then proceed to the appropriate instructions for your security method.

WEP

Select a level of WEP encryption to use, and then enter a passphrase or WEP key.

WEP - To use WEP encryption, select 64-bit or 128-bit characters from the drop-down menu.

Passphrase - Instead of manually entering a WEP key, you can enter a passphrase in the Passphrase field, so a WEP key is automatically generated. This case-sensitive passphrase must match the passphrase of your other wireless network devices and is compatible with Linksys wireless products only. (If you have any non- Linksys wireless products, enter the WEP key manually on those products.)

WEP Key- The WEP key you enter must match the WEP key of your wireless network. If you are using 64-bit WEP encryption, then the key must consist of exactly 10 hexadecimal characters. If you are using 128-bit WEP encryption, then the key must consist of exactly 26 hexadecimal characters. Valid hexadecimal characters are “0” to “9” and “A” to “F”.

Advanced Users:

TX Key - The default transmit key number is 1. If your network’s access point or wireless router uses transmit key number 2, 3, or 4, select the appropriate number from the TX Key drop-down box.

Authentication - The default is set to Auto, where it auto-detects for Shared Key or Open system. Shared Key is when both the sender and the recipient share a WEP key for authentication. Open key is when the sender and the recipient do not share a WEP key for authentication. All devices on your network must use the same authentication type.

Click the Next button to continue to the Confirm New Settings screen or the Back button to return to the previous screen.

Chapter 5: Using the Wireless Network Monitor

Figure 5-23: Wireless Security Screen

Figure 5-24: Wireless Security - WEP Screen

29

Creating a New Profile

Page 33 Page 35
Image 34
Page 33 Page 35
Contents User Guide Copyright and Trademarks How to Use This User GuideWord definition Table of Contents Setup Wizard’s Welcome Screen Adapter’s LEDs10 Import a Profile What’s in This User Guide? IntroductionWelcome But what does all of this mean?Introduction What’s in This User Guide? Roaming Planning Your Wireless NetworkNetwork Topology Topology the physical layout of a networkNetwork Layout Green. The LED lights up when the Adapter is powered on Getting to Know the Wireless-G Notebook Adapter with SRX400LED Indicators Adapter is transmitting or receiving dataStarting the Setup Wizard On the Welcome screen, you have the following choicesInsert the Notebook Adapter Screen Setting Up the Adapter Available Wireless Network ScreenSetting Up the Adapter with an Available Network WEP Key Needed for ConnectionWPA-Personal Needed for Connection Setting Up the Adapter with Manual Setup 10 Available Wireless Network ScreenClick Next to continue or click Back to change any settings 12 Wireless Mode ScreenWEP 17 Wireless Security WPA2 Personal Screen EAP-TLS Radius 22 Confirm New Settings Screen Wireless Network Status screen Using the Wireless Network MonitorAccessing the Wireless Network Monitor Link Information ScreensWireless Network Status More Information Wireless Network Status ScreenWireless Network Statistics ProfileSite Survey Site InformationUsing the Wireless Network Monitor Site Survey Profiles Profiles ScreenCreating a New Profile 12 Create a New Profile14 Available Wireless Network Screen 16 WPA-Personal Needed for Connection 20 Network Settings Screen 21 Wireless Mode Screen 23 Wireless Security Screen 26 Wireless Security WPA2 Personal Screen 27 Wireless Security WPA Enterprise Using EAP-TLS Screen 29 Wireless Security Radius Using EAP-TLS Screen 32 Congratulations Screen Frequently Asked Questions Appendix a TroubleshootingCommon Problems and Solutions Wireless-G Notebook Adapter does not work properlyWhat Ieee 802.11b features are supported? What is the Ieee 802.11b standard?What is the Ieee 802.11g standard? What Ieee 802.11g features are supported?What is Spread Spectrum? What is roaming?What is ISM band? What is DSSS? What is FHSS? And what are their differences?What is WPA? What is WEP?What is RADIUS? Select Use Linksys Wireless Network Monitor Figure B-3 Windows XP Wireless Configuration IconFigure B-4 Available Wireless Network You are now connected to your wireless network Figure B-6 Network Connection Wireless SecuritySecurity Precautions Appendix C Wireless SecuritySecurity Threats Facing Wireless Networks Appendix C Wireless Security Wireless-G Notebook Adapter with SRX400 Shared Resources Appendix D Windows HelpNetwork Neighborhood/My Network Places Appendix E Glossary Wireless-G Notebook Adapter with SRX400 Wireless-G Notebook Adapter with SRX400 Wireless-G Notebook Adapter with SRX400 Wireless-G Notebook Adapter with SRX400 20dBm for Wireless-B/19dBm for Wireless-G Appendix F SpecificationsModel Appendix G Warranty Information Limited WarrantyAppendix H Regulatory Information FCC StatementWireless-G Notebook Adapter with SRX400 Wireless-G Notebook Adapter with SRX400 Wireless-G Notebook Adapter with SRX400 Wireless-G Notebook Adapter with SRX400 Dual-Band Wireless Access Point Appendix I Contact Information Linksys
Top Page Image Contents