Wireless-G Range Expander
9.You should now review the settings you've chosen. If these settings are correct, click the Yes button to save these settings. If you wish to change any of the settings, click the No button. You will exit the Setup Wizard and can start it again to revise your settings.
Figure 5-11: The Confirm New Settings screen
10.At this point, the configuration performed with the Setup Wizard is complete. To configure any other Range Expanders in your network, you can run this Setup Wizard again. Click the Exit button to exit the Setup Wizard.
Figure 5-12: The Congratulations screen
Chapter 5: Setting Up the | 13 |