Before You Start

Instant WirelessTM Series

Chapter 3: Installation of the Drivers and WLAN Monitor for Windows 98SE, Me, and 2000

Important for Windows XP users: Do NOT run the Wireless Network Adapter Setup Wizard. Proceed directly to Chapter 4: Installation of the Wireless PC Card.

Note to Windows 98SE, Me, and 2000 users: You must install this software before installation of the hardware.

This Wireless PC Card Setup Wizard will guide you through the Installation Procedures for Windows 98SE, Me, and 2000.

Running the Automatic Driver Installation

1.Insert the Setup Wizard CD into your CD-ROM Drive. The Setup Wizard should run automatically

and Figure 3-1 should appear. If it does not, click the Start button and choose Run. In the box

that appears, enter D:\setup.exe (where “D” is the letter of your CD-ROM drive).

Figure 3-1

•The Setup button begins the software installation process, as shown on the next page.

•The User Guide button shows you a PDF file of the User Guide.

•The LINKSYS WEB button links you to the Linksys website.

•The Exit button allows you to the exit the Setup Wizard.

Wireless PC Card

Note: If you stop the installation before it has finished, you will have to run the complete installation again before installation of your hardware.

Note: If you need to abort or terminate the installation, press the Cancel button at any time during the installation. Otherwise the installation will continue automatically.

1.To install your Wireless PC Card, click on the Setup button.

2.After you see Figure 3-2, click the Next button to continue.

Figure 3-2