Airlink101 AWLH3026T user manual

Page 11

To open the Wireless PCI Adapter’s utility go to Start > (All) Programs > Airlink101 > WLAN Monitor.

Note: The utility automatically adds an available wireless network to the Preferred WLANs box. If no SSID is added, or if the SSID is wrong, please refer to the following steps to join the appropriate wireless network. Be sure to remove the wrong SSID from the Preferred WLANs box before adding any new SSID. You can remove the wrong SSID by selecting it and clicking on Remove.

Step 1 Select the SSID of the wireless network you wish to connect to from the Available WLANs box and click Connect.

11

Image 11
Contents 802.11g Wireless PCI Adapter Model # AWLH3026T User’s Manual Table of Contents Introduction Package ContentsInstall Driver & Utility InstallationPage Page Page Verify Driver Installation Page Configure the Wireless PCI Adapter Page Page Configuration Tab Configure the Wlan MonitorConfiguring WEP Encryption Click Apply and then OK at the Configuration Tab Configuring WPA-PSK Encryption Click Apply and then OK at the Configuration Tab Status Tab Authentication State Displays the authentication stateOption Tab General SettingAdvance Setting About Tab Specifications Mailsupport@airlink101.com Technical Support