Advance Setting

Disable Radio: Check the box to disable the radio signal

Fragmentation Threshold: Set the desired fragmentation threshold

RTS Threshold: Set the desired RTS threshold

Frequency: 802.11b/g switches automatically between 802.11b and 802.11g speed depending on the other wireless device. 802.11b will only connect at 802.11b speed (11 Mbps or lower).

Start ad hoc network: Choose the appropriate frequency for your ad-hoc network

Ad-Hoc Channel: Choose the desired channel for your ad-hoc network. All devices in the ad-hoc network must use the same channel.

Power save Mode: Choose among Disable, Max Save, Fast Save

•Disable - This default setting consumes the most power.

•Max Save - This setting consumes the least power.

•Fast Save - This setting consumes half the power.

Tx Burst: Choose to enable or disable burst transmission.

WLAN type to connect

Infrastructure and Ad-Hoc network: For connecting to either an access point or a peer-to-peer network without an access point.

Infrastructure: For connecting to an access point only

Ad-Hoc: For connecting directly to another wireless client without using an Access Point or wireless router. (Both wireless clients must be set to Ad-Hoc mode).

Automatically connect to non-preferred networks: Check the box to automatically connect to non-preferred networks upon startup.