Airlink101 ANAS350 manual Section, Hard Drive Installation, Ide

Ver. 1.0 Step 2 Pull out the front panel.

Quick Installation Guide

Office NAS

3.5” IDE/SATA Network Attached Storage

Model # ANAS350

Package Contents:

• Office NAS

• Vertical Stand

• Power adapter

• Ethernet Cable

• Utility CD

• Quick Installation Guide

• Screws (4)

• Rubber feet (4)

Section 1

Hard Drive Installation

Step 3 Put the 3.5-inch IDE or SATA hard disk into the slot, and connect the proper data cable for your hard drive. (The red cable is used for SATA and the gray one is for IDE).

WARNING: Step 3a IDE

This Network Attached Storage device is not hot-swappable. Please make sure that it is turned off and not connected to the power outlet when performing the following assembly procedure.

Step 1 Unfasten the two screws at the rear side of the device, and pull out the back cover.