Airlink101 AWLC3026 user manual Configuring the 802.11g Wireless Cardbus Adapter, Status Tab

Page 15

4. Configuring the 802.11g Wireless Cardbus Adapter

This section describes the various functions of the Wireless Utility that you can configure, including the settings of wireless encryption.

There are two ways to access the Wireless Utility:

1.Click Start > Programs > Airlink101 802.11g Cardbus Utility

2.Double-click on the Airlink101 Wireless Icon located in the system tray

4.1The Status Tab

Once you have accessed the Wireless Cardbus Adapter utility, you will have additional menus to configure your adapter. The first window that appears once you open the utility is the Status tab.

This window displays all the information for the Wireless Cardbus Adapter under its current configuration settings. This information includes the selected SSID, Network Mode, Channel, Transmit Rate, Encryption Type and Signal Strength/Link Quality.

15

Image 15
Contents Ver a Table of Contents Introduction Package ContentsInstall Driver & Utility InstallationPage Page Select Install the software automatically and click Next Page Page Verify Driver Installation Page Initializing the 802.11g Wireless Cardbus Adapter Setting up your 802.11g Wireless Cardbus Adapter Page Status Tab Configuring the 802.11g Wireless Cardbus AdapterBit Configuration TabFrom this window, you may select the following Advanced TabProfile Tab Network Tab Statistics Tab About Tab Article I. Technical SupportTroubleshooting Technical Specifications