AT-2700 Series, Fast Ethernet PCI Adapter Cards
STATUS INDICATORS |
| POWER CHARACTERISTICS | ORDERING INFORMATION | ||||||||||||
UTP Ports: |
|
|
|
|
| 5vDC | at 5W (typical) |
|
|
| |||||
Link |
|
| Solid on indicates valid link to hub or switch | ENVIRONMENTAL SPECIFICATIONS | |||||||||||
Activity | Flashing | indicates network activity | 10/100Mbps Autosensing UTP Adapter Card | ||||||||||||
Speed |
|
| Solid on indicates 100Mbps operation | Operating Temp. | 0°C | to | 50°C | ||||||||
Duplex |
| Solid on indicates full duplex operation | Relative Humidity | 5% | to | 80% noncondensing | |||||||||
PC BUS INTERFACE |
|
|
| PHYSICAL CHARACTERISTICS | Adapter card with one 100FX connection | ||||||||||
|
|
|
| ||||||||||||
Bus Interface | PCI | Bus | 2.1 | Compliant | Dimensions | 10.7cm | x 15.3cm | ||||||||
Bus Width | 32 | bit |
|
|
|
|
| (4.2” x | 6.4”) | Low profile adapter card | |||||
Data | Transfer mode | PCI | 2.1 |
| Bus | Mastering |
|
| half | size form factor | with one 100FX connection | ||||
Network Mng. Interface | DMI | 2.0 | Support | Weight | 120g (4.2oz) |
| |||||||||
Power | Mng. Interface | ACPI |
|
|
|
|
|
|
|
| |||||
UTP INTERFACE |
|
|
|
|
| Adapter card with one 100FX | |||||||||
|
|
|
| Dimensions | 6.5cm | x 14.3cm | and one 10/100TX connection | ||||||||
Connector Shielded |
| STANDARDS COMPLIANCE | |||||||||||||
100MBPS FIBER INTERFACE | |||||||||||||||
IEEE | 802.3u | 10T | & | 100TX | Low profile adapter card with one 100FX | ||||||||||
Connectors | ST, SC, | or | IEEE | 802.3u | 100FX |
| and one 10/100TX connection | ||||||||
Fiber | type | 62.5/125µM | ELECTRICAL/MECHANICAL APPROVALS |
| |||||||||||
Ouput | Power | Min | Where AA = | ||||||||||||
DRIVER SUPPORT |
|
|
|
| FCC class B |
|
|
| ST, SC, | ||||||
|
|
|
| VDE | class B |
|
|
|
| ||||||
16 | bit | ODI | Netware | workstation | CE |
|
|
|
| 20 packs are available for additional savings | |||||
32 | bit | ODI | Netware | server |
|
|
|
|
|
| |||||
NDIS | 2.0.1 | MSDOS | client |
|
|
|
|
|
|
| |||||
NDIS | 3.0 miniport | Win95 | retail |
|
|
|
|
|
|
| |||||
NDIS 4.0 | NT 4.0, Win95 OSR2 |
|
|
|
|
|
| ||||||||
NDIS | 4.0 | Fault Tolerance |
|
|
|
|
|
| |||||||
NDIS 5.0 | Win98, Win2000, WinME, WinXP |
|
|
|
|
|
|
USA Headquarters: 19800 North Creek Pkwy, Suite 200, Bothell, WA 98011, USA Tel: 800.424.4284 | Fax: 425.481.3895 | |||||
European Headquarters: Via Motta 24, 6830 Chiasso, Switzerland | (Corporate) Tel: (+41) | 91 | 697.69.00 | Fax: (+41) | 91 | 697.69.11 |
| (European Sales) Tel: (+39) | 02 | 414.112.1 | Fax: (+39) | 02 | 414.112.61 |
www.alliedtelesyn.com
© 2003 Allied Telesyn, Inc. All rights reserved. Information in this document is subject to change without notice.
All company names, logos, and product designs that are trademarks or registered trademarks are the property of their respective owners.