TABLETOP SOLUTIONS
PRECAUTIONS / SAFETY WARNINGS | 1 |
Please read this manual carefully before using your PNP300/350 and keep it handy for future reference. These safety instructions are to ensure the long life of your PNP300/350 and to prevent fire and shock hazards. Please read them carefully and heed all warnings.
1.1 GENERAL
∙Do not open the unit or power supply case, there are
∙There are no user serviceable parts inside. Qualified ALTINEX service personnel must perform all service on the Pop ‘N Plug.
1.2 HANDLING
∙For best results, place the PNP300/350 in a dry area away from dust and moisture.
∙To prevent fire or shock, do not expose this unit to water or moisture. Do not place the PNP300/350 in direct sunlight, near heaters, or
∙Handle the PNP300/350 carefully. Dropping or jarring can damage the unit.
∙Do not pull any cables that are attached to the PNP300/350.
∙Do not place heavy objects on top of the PNP300/350.
∙Never place fingers inside the openings of the unit.
∙If the PNP300/350 interface is not used for an extended period, disconnect the unit from the wall to avoid fire, shock, and loss of power.
∙We recommend using wall outlets with a Ground Fault Circuit Interrupter (GFCI) for maximum protection.
1.3 CLEANING
∙Unplug the PNP300/350 before cleaning.
∙Clean only with a dry cloth. Never use strong detergents or solvents such as alcohol or thinner. Do not use a wet cloth or water to clean the unit. Do not open the unit to clean.
1.4 FCC NOTICE
∙This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
∙This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and if not installed and used in accordance with instructions found herein, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
∙Any changes or modifications to the unit not expressly approved by ALTINEX, Inc. could void the user’s authority to operate the equipment.
2 |