Installing Your VM2143VS, Operation

V-MATRIX

INSTALLING YOUR VM2143VS

Step 1. Decide which type of input video signal will be used on each input and what the impedance requirements are of the input source. Refer to Diagram 2 through Diagram 5 for jumper settings. Note that DC Coupling is most commonly used with DVD players and VCR's and AC Coupling is most often used with video conferencing equipment and cameras.

Step 2. Slide the VM2143VS into one of the slots on the top half of the V-Matrix™ Enclosure. The top half of the enclosure is for input cards and the bottom half is for

output cards. Make sure that the VM2143VS fits into place. Secure the card to the V-Matrix™ by tightening the retainer screws located on the top and bottom of each cover plate.

Step 3. Connect a cable from the video source to the input connector of the VM2143VS.

Note: The VM2143VS is an input card for the V-Matrix™ system. An output card, such as the VM2144VS, will need to be present in the output portion of the enclosure in order to get an output signal.

OPERATION

Refer to the VM2210BE V -Matrix™ Basic Enclosure User's Guide (P/N400-0167-001) for complete instructions on using the VM2143VS as part of a V-Matrix™ System

The VM2143VS card will operate successfully as long as the card is installed properly and other technical specifications are followed.

TROUBLESHOOTING GUIDE

We have carefully tested and have found no problems in the supplied VM2143VS. However, we would like to offer suggestions for the following:

8.1 CARD LED'S ARE NOT ON

There are two LED's on the VM2143VS that indicate power is being supplied to the card. The LED's are toward the bottom of the card and facing to the left as viewed from the back of the enclosure. It may be necessary to remove other cards to see the LED's.

Cause 1: Enclosure has no power.

Solution: Make sure the V-Matrix enclosure is plugged in and the power switch is ON. The LED's on the front of the enclosure should be ON. If the enclosure has power and its LED's are ON, see Cause 2.

Cause 2: Card has no power.

Solution: Check the LED's on the card. Both must be ON for the unit to function properly. If one or both of the LED's are OFF, make sure the board is pushed in all the way. If the LED's are still not ON, see Cause 3.

Cause 3: Card cage slot has a problem.

Solution 1: Test the card in other slots of the enclosure. If the slot was damaged, the card may work in other slots. If other slots work and the LED's light, the problem is the card cage slot. The enclosure may require service. Call ALTINEX at (714) 990-2300. If the other slots do not work and the LED's are still not ON, see Solution 2.

Solution 2: Take any other known good card and verify that the slot used is good by seeing if the other card’s LED's light in that slot. If they light, then the original card may be the source of the problem. Call ALTINEX at (714) 990-2300.

VM2143VS specifications

The Altinex VM2143VS is a versatile and robust video switcher designed to meet the needs of professional AV applications. As part of Altinex's commitment to high-quality solutions, the VM2143VS offers a range of features that cater to modern presentation and content management requirements.

One of the standout features of the VM2143VS is its ability to handle multiple video formats. Equipped with support for both composite and RGBHV video signals, it ensures compatibility with a wide array of devices, from older VGA outputs to newer digital interfaces. This versatility makes it suitable for environments such as classrooms, conference rooms, and live event venues.

The VM2143VS comes with a seamless switching capability, which ensures that transitions between sources are smooth and free of glitches. This smooth switching is essential for maintaining a polished, professional presentation, where interruptions can detract from the message being conveyed. The unit supports various aspect ratios, allowing users to achieve the desired look without compromising image quality.

In terms of connectivity, the Altinex VM2143VS is impressively equipped. It features a comprehensive selection of input and output options, including multiple VGA inputs and outputs, ensuring that several devices can be connected simultaneously. This capability saves time during set-ups and gives users the flexibility to switch between multiple sources on-the-fly.

Another notable characteristic of the VM2143VS is its intuitive control interface. Users can easily manage the switcher through a straightforward user interface, which is designed to simplify the operation in fast-paced environments. This feature is particularly beneficial for operators who may not have extensive technical backgrounds.

Additionally, the VM2143VS is built with reliability in mind. Its robust design ensures that it can withstand the demands of continual use, making it an excellent investment for organizations that rely on frequent AV presentations. The unit is also compact and easily rack mountable, allowing for efficient integration into existing AV setups.

In summary, the Altinex VM2143VS is a feature-rich video switcher that excels in versatility, connectivity, and user-friendliness. Its seamless switching capabilities, broad format support, and intuitive operation make it an essential tool for any setting where quality AV presentation is paramount. With its durable build and thoughtful design, the VM2143VS stands out as a leading solution for professional AV needs.