Altinex manual About Your PNP400, Technical Specifications

DESIGNER SOLUTIONS

ABOUT YOUR PNP400 2

PNP400

POP 'N PLUG TOWER

The PNP400 Interconnect Tabletop Solution is designed for installation into a conference room table. The PNP400 provides a means of connecting audiovisual, network, and power sources into a presentation system. It is ideal for use with ALTINEX computer video interfaces like the VA6804FC. The PNP400 can “pop up” into a raised position to provide access to connectors, or it can be lowered into a table when not in use. The PNP400 uses a tower-type construction with a gas spring to raise the interface into position above the tabletop.

The PNP400 Interconnect has two openings on either side of the unit, servicing both sides of a table. Several optional sectional plates are available for the following: AC power, computer video (15-pin HD), composite video (RCA), audio

(RCA), computer audio (3.5 mm stereo), phone/modem (RJ-11), RS-232 (9-pin D-sub), network (RJ-45), etc. Contact the ALTINEX Sales Department for additional information regarding optional connectors.

The PNP400 Interconnect is designed for use with tables ranging from 0.25-4.0 in (6-102 mm) thick. The PNP400 comes in a standard matte black finish. Custom finishes for the top of the PNP400 allow the unit to accent any tabletop and are available on a custom order basis for an additional charge.

TECHNICAL SPECIFICATIONS 3

Specifications are subject to change.

See www.altinex.com for up-to-date information.

MECHANICAL	PNP400 (standard)
Maximum Table Thickness	4.00 in (102 mm)
Minimum Table Thickness	0.25 in (6 mm)
Height Above Table (open)	2.909 in (74 mm)
Height Below Table Surface	5.760 in (146 mm)
Base Width	6.674 in (170 mm)
Base Depth	4.840 in (123 mm)
Finish	Black
T° Operating	10°C-35°C
T° Maximum	50°C
Humidity	90% non-condensing
Table 1. PNP400 Mechanical

400-0109-006 3