Altinex manual About Your TNP100AU, Technical Specifications

Page 4

ACCESSORIES

cause harmful interference in which case the user will be required to correct the interference at his own expense.

Any changes or modifications to the unit not expressly approved by ALTINEX, Inc. could void the user’s authority to operate the equipment.

ABOUT YOUR TNP100AU

2

The TNP100AU is designed for installation into a conference room table. The Tilt ‘N Plug™ Interconnect Box (TNP100AU) provides a means of connecting audio, video, control, and computer video sources into a presentation system. It is ideal for use together with ALTINEX computer video interfaces. The Tilt ‘N Plug™ Interconnect Box can either pop up and “tilt” to a raised position to provide access to the connectors or it can be lowered into a table when not in use. A pneumatic shock inside the TNP100AU’s tower type construction applies pressure to the panel mechanism, making it easy to raise and secure the unit firmly in an open position.

The Tilt ‘N Plug™ Interconnect Box has one input plate on the front panel of the unit. The standard plate offers Computer Video (15-pin HD); Composite Video (RCA), Audio (RCA), Computer Audio (Stereo Mini), Modem (RJ-11), 9-pin D-type RS-232 and Network (RJ-45) input connections. All signals are passed through to a set of female connectors or

cables. Several optional connectors can be substituted for the standard set of connectors.

The Tilt ‘N Plug™ Interconnect Box is designed for use with tables ranging from one to three inches thick. It offers an optional mounting bezel to secure the unit flush with the table’s surface. The Tilt ‘N Plug™ comes in a standard matte black color. The top of the unit can be finished to match the table or it can be painted another color. This is available on a custom per order basis at an additional charge.

TECHNICAL SPECIFICATIONS

3

 

 

 

 

 

 

 

FEATURES/

 

TNP100AU

TNP100AU

 

 

DESCRIPTION

 

 

 

 

 

 

 

 

 

 

 

GENERAL

 

 

 

 

 

Front Panel

 

 

 

 

 

Standard

 

Faceplate

Cable end

 

 

Configuration

 

under table

 

 

 

 

 

 

Connectors

 

 

 

 

 

 

 

1 receptacle

1 plug with 6ft

 

 

Power

 

cord

 

 

 

 

 

 

 

 

1 Australian outlet with a 5A

 

 

 

 

circuit breaker

 

 

Computer Video

 

1 15-pin HD-F

1 15-pin HD-F

 

 

Composite Video

1 Yellow RCA-F

1 Yellow RCA-F

 

 

Audio, left, right

 

1 Black, 1 Red

1 Black, 1 Red

 

 

 

 

RCA-F

RCA-F

 

 

Audio

1 3.5 mm stereo

1 3.5 mm stereo

 

 

 

 

female plug

female plug

 

 

Telephone

 

1 RJ-11 F (6-

1-RJ-11-M (6-

 

 

 

 

position)

position)

 

 

Network

 

1 RJ-45-F (8-

1 RJ-45-M (8-

 

 

 

 

position)

position)

 

 

Control

 

1 DB-9 F

1 DB-9 F

 

Table 1. TNP100AU General

Mechanical

TNP100AU

Width (inches)

6.05in (154mm)

Height (closed)

4.79in (122mm)

Height (opened)

8.05in (205mm)

Depth (inches)

7.560 (192mm)

Finish

Flat Black

Operation

 

T° Operating

10°C-35°C

T° Maximum

50°C

Humidity

90% non-condensing

Table 2. TNP100AU Mechanical

Power

TNP100AU

Power Rating (pass

220-240V~5A,

through connector)

50/60Hz

Table 3. TNP100AU Electrical

3

Image 4
Contents TNP100AUUN Table of Contents IntroductionPrecautions / Safety Warnings InstallationCleaning GeneralTechnical Specifications About Your TNP100AUTNP100AU Dimensions Description Diagram Application DiagramDiagram 3 Application Diagram 4 Final Installation Diagram 5 Table Cutout Requirements Installation Cable ClampFrequently Asked Questions FAQ Cables and AccessoriesHOW to Release and Replace the GAS Spring OperationHigh Resolution Cable High ResolutionSuper High Resolution Optional Custom ConnectorsTroubleshooting Guide Limited WarrantyAltinex Policy Return Policy