Definitive Technology XTR, Solo Cinema Integrated Home Theater System Ir Repeater, On Off

IR REPEATER

ON

OFF

3.IR LEARN: IR Learn is used to program SoloCinema XTR to respond to other remote

controls: for example, your cable box or TV’s remote IR commands. You can teach our bar to respond to the following IR commands from other remote controls:

o POWER

o VOLUME Up and Down o MUTE

o INPUT SOURCE commands (up to four inputs). The On-Screen display is used to teach the remote commands to SoloCinema XTR (see example below):

To learn your TV remote’s Volume UP command: with the SoloCinema XTR powered on,

1.Press the SoloCinema XTR remote control MENU button to open the OSD

2.Scroll down to the third menu box: IR Learn

3.Click right arrow on the XTR remote cursor wheel, and VOLUME UP Illuminates

4.Press the XTR remote ENTER key. Note: You will see the words “PRESS & HOLD KEY” displayed on the On-Screen Display.

5.Pick up the remote you wish to have the SoloCinema XTR learn – for example, the TV remote. Press and hold the Volume Up key

6.The words “PRESS & HOLD KEY” now change to say “RELEASE”. Release the TV’s volume up key and the On-Screen Display again prompts you to “PRESS & HOLD KEY”.

7.The On-Screen Display will prompt you to PRESS & HOLD KEY three times. The word “DONE” then appears on the lower right hand corner of the On-Screen Display.

8.The OSD automatically navigates to STORE once the 3 press-and-release prompts have been completed.

9.Press the ENTER key while STORE is illuminated. The menu now reverts back to highlighting the IR LEARN function.

18