Ssa Immersion, SOURCE 4 INPUT, System | Definitive Technology XTR

SSA IMMERSION

MOVIE MODE

MUSIC MODE

6.SOURCE 4 INPUT: The fourth source input accommodates either analog RCA inputs, or Toslink Digital inputs. By default, the system auto-detects between the digital Toslink and RCA inputs. If a digital Toslink signal is present, it will be used. Alternatively, you can select either digital or analog to lock onto one input.

SOURCE 4 INPUT

AUTO

DIGITAL

ANALOG

7.HDMI AUDIO: This menu option controls whether or not audio is sent to the TV via HDMI. The factory preset is NORMAL. The DEMO feature routs audio to the TV set via the HDMI output. In normal operation, audio is not sent to the TV. A consumer would rarely, if ever, need to use this feature. It is intended to allow comparisons between the audio that is reproduced by the bar, and the same audio through the TV speakers.

HDMI AUDIO

DEMO

NORMAL

8.SYSTEM: Selecting the RESTORE DEFAULTS option restores all system settings to their original factory default settings. It may be useful in trouble shooting system issues.

FIRMWARE: One addition item appears. There is a sub-menu, under the system bar,

which notes which version of the firmware is installed in your system, e.g: FIRMWARE R0150. If you have an issue with your system, please have this firmware version number handy prior to contacting our customer service department. They will need this information to be able to help you.

Note: Please register your SoloCinema XTR at www.DefinitiveTech.com/Register/ so that we can alert you in the event of firmware upgrades.