D-Link DWL_7100 manual Home LAN, Get IP From IP Address

Using the Configuration Menu (continued)

Home > LAN

LAN is short for Local Area Network. This is considered your internal network. These are the IP settings of the LAN interface for the DWL-7100AP. These settings may be referred to as private settings. You may change the LAN IP address if needed. The LAN IP address is private to your internal network and cannot be seen on the Internet.

Get IP From-

IP Address-

Select Static (Manual) or Dynamic (DHCP) as the method you will use to assign an IP address to the DWL-7100AP.

The IP address of the LAN interface. The default IP address is: 192.168.0.50 (Note: You will need to use the AP Manager to determine the IP address dynamically assigned to the access point.)

Subnet Mask- The default subnet mask is 255.255.255.0

Default Gateway- This field is optional. Enter in the lP address of the router on your network.

Apply- Click Apply if you have made any changes.

13