D-Link DWL_7100 manual Advanced Mode

Using the Configuration Menu (continued)

Advanced > Mode

Choose 802.11a or 802.11g wireless band; then select from the following options:

Access Point: Select this mode to create a WLAN (wireless local area network).

PtP Bridge (Point to Point Bridge): This mode enables you to connect two

WLANS.

Remote AP MAC Address: Input the remote AP MAC address of the AP with which the DWL-7100AP will associate.

Remote Remote

PtMP Bridge (Point to Multi-Point Bridge): This mode enables you to connect multiple WLANs

Remote AP MAC Address: Input the remote AP MAC Addresses of the APs with which the DWL-7100AP will associate

AP Repeater: To extend the range of the wireless network select this option and enter the MAC address of the remote AP within your network that will have its range extended.

Remote AP MAC Address: Enter the MAC address of the remote AP within your network that will have its range extended.

Apply: Click Apply if you have made any changes.

14