D-Link DSL-302T user manual Hardware Installation, Power on Modem, Factory Reset Button

Page 21

DSL-302T ADSL Modem User’s Guide

2

Hardware Installation

The DSL-302T maintains three separate interfaces, an Ethernet, a USB and an ADSL interface. Place the Modem in a location where it can be connected to the various devices as well as to a power source. The Modem should not be located where it will be exposed to moisture or excessive heat. Make sure the cables and power cord are placed safely out of the way so they do not create a tripping hazard. As with any electrical appliance, observe common sense safety procedures.

The access point can be placed on a shelf or desktop, ideally you should be able to see the LED indicators on the front if you need to view them for troubleshooting.

Power on Modem

CAUTION: The Modem must be used with the power adapter included with the device.

To power on the Modem:

1.Insert the AC Power Adapter cord into the power receptacle located on the rear panel of the Modem and plug the adapter into a suitable nearby power source.

2.You should see the Power LED indicator light up and remain lit. The Status LED should light solid green and begin to blink after a few seconds.

3.If the Ethernet port is connected to a working device, check the Ethernet Link/Act LED indicators to make sure the connection is valid. The Modem will attempt to establish the ADSL connection, if the ADSL line is connected and the Modem is properly configured this should light up after several seconds. If this is the first time installing the device, some settings may need to be changed before the Modem can establish a connection.

Factory Reset Button

The Modem may be reset to the original factory default settings by depressing the reset button for a few seconds while the device is powered on. Use a ballpoint or paperclip to gently push down the reset button. Remember that this will wipe out any settings stored in flash memory including user account information and LAN IP settings. The factory default IP address of the Modem is 192.168.1.1 and the subnet mask is 255.255.255.0, the default management Username is admin and the default Password is admin.

7

Page 20 Page 22
Image 21
Page 20 Page 22
Contents DSL-302T Adsl Modem User’s Manual FCC Warning DSL-302T DSL Modem User’s GuideWarranties Exclusive Wichtige SicherheitshinweiseLimited Warranty HardwareSoftware Warranty and Registration Information for USA Only DSL-302T DSL Modem User’s Guide Table of Contents Status Installation Overview About This User’s GuideBefore You Start Information Required for Installation USB port Ethernet NICDhcp Client status Obtain an IP address automatically that is, theyInstalling the USB Driver DSL-302T DSL Modem User’s Guide Page Introduction What is ADSL?Modem Description and Operation Low Pass FiltersWeb Browser Ethernet Port NIC AdapterAdditional Software Modem Features Standards Compatibility and Compliance Packing List Front Panel DisplayRear Panel Connections Hardware Installation Power on ModemFactory Reset Button Connect Adsl Line Network ConnectionsConnect Modem to Ethernet Computer to Modem ConnectionHub or Switch to Modem Connection Configuring the Modem for the First Time Configuring IP Settings on Your ComputerWan Configuration Summary Configure Windows XP for Dhcp DSL-302T Adsl Modem User’s Guide Windows Configure Windows 2000 for DhcpConfigure Windows ME for Dhcp Windows MEWindows 95 and Windows Configure Windows 95 and Windows 98 for Dhcp Configure Windows NT 4.0 for DhcpWindows NT 4.0 Workstations Home Home Status Information window Configure the ModemSetup PPoA Configure a New ConnectionDSL-302T Adsl Modem User’s Guide PPPoE Setup Connection PPPoE windowBridge Setup New Connection Bridge windowStatic IP Setup Static IPDSL-302T Adsl Modem User’s Guide Web-based Management Accessing the Web ManagerSetup Dhcp Configuration window Dhcp ConfigurationManagement IP Setup Management IP windowSystem Commands Changing the User Name and PasswordRestore Save AllRestart Tools Remote Log window Remote LogTools User Management window User ManagementTools Update Gateway window Update GatewayTools Ping Test window Ping TestStatus 10. Status Network Statistics window Network Statistics11. Status Connection Status window Connection Status12. Status Dhcp Clients window Dhcp Clients13. Status Modem Status window Modem Status14. Status Product Info. window Product Info15. Status System Log window System LogHelp Technical Specifications EMI Using the Default IP Address IP Address SetupAssigning Network IP Addresses Manual IP Address AssignmentUsing Dhcp IP Setup Example #2Changing the IP Address of the Modem IP Addresses IP ConceptsClass Beginning Address Ending Address IP Network ClassesIP Class Subnet Mask Subnet MaskMicrofilter Installation Microfilters and SplittersMicrofilters Line Splitter Line Splitter InstallationOffices Italy Link Mediterraneo Srl/D-Link Italia Link U.S.A Print, type or use block letters Registration Card

DSL-302T specifications

The D-Link DSL-302T is a highly regarded ADSL modem that has become a popular choice for both home and small office users. Known for its reliability and ease of use, this modem is designed to provide high-speed internet access over traditional telephone lines, making it an ideal solution for users who need robust connectivity without the complications of more advanced networking setups.

One of the key features of the DSL-302T is its support for ADSL2 and ADSL2+ technologies. These advancements enable the modem to deliver faster speeds and improved performance over longer distances compared to traditional ADSL. With data rates of up to 24 Mbps downstream and 1 Mbps upstream, users can enjoy seamless streaming, online gaming, and smooth browsing experiences.

The DSL-302T is equipped with an Ethernet port, allowing users to connect directly to a computer or to a router for sharing the internet connection with multiple devices. This flexibility makes it suitable for both individual users and those who want to set up a more extensive home network.

In terms of installation, the D-Link DSL-302T is designed for user-friendliness. It comes with a straightforward setup wizard that guides users through the configuration process. This ease of installation means that even those with limited technical expertise can have the modem up and running in no time.

Security is another crucial aspect of the DSL-302T. It incorporates features such as NAT (Network Address Translation) and a built-in firewall to protect users' networks from external threats. It also supports PPPoE, which is essential for connecting to many ISPs.

The modem’s design is compact and lightweight, allowing for easy placement in any environment. It also operates quietly, which is an advantage for home users who prefer a serene atmosphere.

Overall, the D-Link DSL-302T combines speed, reliability, and security, making it a solid choice for anyone seeking a dependable ADSL modem. Its support for modern ADSL technologies, ease of installation, and robust security features make it suitable for a variety of internet usage scenarios. With D-Link's reputation for quality and customer support, the DSL-302T remains a relevant option for users looking to enhance their internet experience.
Top Page Image Contents