D-Link DSL-302T user manual Setup Static IP

Page 37

DSL-302T ADSL Modem User’s Guide

3.Do not change the VPI or VCI values unless you are required to do so. If these settings are incorrect, the ADSL connection will not function. Many users will be able to use the default settings. If you are told to change these, type in the values given to you by your service provider.

4.Leave the default QoS values if you are unsure or the ISP did not provide this information.

5.Do not change the PCR or SCR values unless you are required to do so. If you are told to change these, type in the values given to you by your service provider.

6.The Encapsulation values LLC (SNAP) and VC (MUX) are two different methods of encapsulating the PPP packet. Contact your ISP to make sure which encapsulation is being supported.

7.Click the Apply button when you have entered all the information. The browser window may briefly go blank. After a few seconds the new connection you just configured will become the active connection for the Modem.

8.To make your temporarily saved connection permanent, click the Save All button in the System Commands window on the Tools tab.

Static IP

Static is used whenever a known static IP is assigned. The accompanying information such as the Subnet mask and the gateway should also be specified in order to be able to connect. Up to three Domain Name Server (DNS) addresses can also be specified. These are the servers would enable you to have access to other web servers. Valid IP addresses range from 0.0.0.0 to 255.255.255.255.

Figure 3- 7. Setup Static IP

To configure the WAN connection for Static, perform the steps listed below. Some of the settings do not need to be changed the first time the device is set up, but can be changed later if you choose.

23

Page 36 Page 38
Image 37
Page 36 Page 38
Contents DSL-302T Adsl Modem User’s Manual FCC Warning DSL-302T DSL Modem User’s GuideWarranties Exclusive Wichtige SicherheitshinweiseHardware Limited WarrantySoftware Warranty and Registration Information for USA Only DSL-302T DSL Modem User’s Guide Table of Contents Status About This User’s Guide Installation OverviewBefore You Start Information Required for Installation USB port Ethernet NICDhcp Client status Obtain an IP address automatically that is, theyInstalling the USB Driver DSL-302T DSL Modem User’s Guide Page Introduction What is ADSL?Modem Description and Operation Low Pass FiltersEthernet Port NIC Adapter Web BrowserAdditional Software Modem Features Standards Compatibility and Compliance Packing List Front Panel DisplayRear Panel Connections Power on Modem Hardware InstallationFactory Reset Button Connect Adsl Line Network ConnectionsConnect Modem to Ethernet Computer to Modem ConnectionHub or Switch to Modem Connection Configuring IP Settings on Your Computer Configuring the Modem for the First TimeWan Configuration Summary Configure Windows XP for Dhcp DSL-302T Adsl Modem User’s Guide Windows Configure Windows 2000 for DhcpWindows ME Configure Windows ME for DhcpWindows 95 and Windows Configure Windows NT 4.0 for Dhcp Configure Windows 95 and Windows 98 for DhcpWindows NT 4.0 Workstations Home Home Status Information window Configure the ModemSetup PPoA Configure a New ConnectionDSL-302T Adsl Modem User’s Guide PPPoE Setup Connection PPPoE windowBridge Setup New Connection Bridge windowStatic IP Setup Static IPDSL-302T Adsl Modem User’s Guide Web-based Management Accessing the Web ManagerSetup Dhcp Configuration window Dhcp ConfigurationManagement IP Setup Management IP windowSystem Commands Changing the User Name and PasswordSave All RestoreRestart Tools Remote Log window Remote LogTools User Management window User ManagementTools Update Gateway window Update GatewayTools Ping Test window Ping TestStatus 10. Status Network Statistics window Network Statistics11. Status Connection Status window Connection Status12. Status Dhcp Clients window Dhcp Clients13. Status Modem Status window Modem Status14. Status Product Info. window Product Info15. Status System Log window System LogHelp Technical Specifications EMI Using the Default IP Address IP Address SetupAssigning Network IP Addresses Manual IP Address AssignmentIP Setup Example #2 Using DhcpChanging the IP Address of the Modem IP Addresses IP ConceptsClass Beginning Address Ending Address IP Network ClassesIP Class Subnet Mask Subnet MaskMicrofilters and Splitters Microfilter InstallationMicrofilters Line Splitter Line Splitter InstallationOffices Italy Link Mediterraneo Srl/D-Link Italia Link U.S.A Print, type or use block letters Registration Card

DSL-302T specifications

The D-Link DSL-302T is a highly regarded ADSL modem that has become a popular choice for both home and small office users. Known for its reliability and ease of use, this modem is designed to provide high-speed internet access over traditional telephone lines, making it an ideal solution for users who need robust connectivity without the complications of more advanced networking setups.

One of the key features of the DSL-302T is its support for ADSL2 and ADSL2+ technologies. These advancements enable the modem to deliver faster speeds and improved performance over longer distances compared to traditional ADSL. With data rates of up to 24 Mbps downstream and 1 Mbps upstream, users can enjoy seamless streaming, online gaming, and smooth browsing experiences.

The DSL-302T is equipped with an Ethernet port, allowing users to connect directly to a computer or to a router for sharing the internet connection with multiple devices. This flexibility makes it suitable for both individual users and those who want to set up a more extensive home network.

In terms of installation, the D-Link DSL-302T is designed for user-friendliness. It comes with a straightforward setup wizard that guides users through the configuration process. This ease of installation means that even those with limited technical expertise can have the modem up and running in no time.

Security is another crucial aspect of the DSL-302T. It incorporates features such as NAT (Network Address Translation) and a built-in firewall to protect users' networks from external threats. It also supports PPPoE, which is essential for connecting to many ISPs.

The modem’s design is compact and lightweight, allowing for easy placement in any environment. It also operates quietly, which is an advantage for home users who prefer a serene atmosphere.

Overall, the D-Link DSL-302T combines speed, reliability, and security, making it a solid choice for anyone seeking a dependable ADSL modem. Its support for modern ADSL technologies, ease of installation, and robust security features make it suitable for a variety of internet usage scenarios. With D-Link's reputation for quality and customer support, the DSL-302T remains a relevant option for users looking to enhance their internet experience.
Top Page Image Contents