D-Link DWL-A520 manual Current Consumption, Operating Voltage, Network Architecture, Antenna Type

Page 60

Current Consumption

•Sleep mode - <40mW

•Transmit mode - 1650mW

•Receive mode – 1250mW

Operating Voltage

•3.3V± -10%

Network Architecture

•Ad-Hoc Mode (Peer-to-Peer without Access Point)

•Infrastructure Mode (Communications to wired networks via Access Points with Roaming)

Antenna Type

•Integrated dual diversity antennas with 1.5dBi gain

Available Channels:

•Eight non-overlapping channels for North America

MTBF (Mean Time Between Failure)

•30,000 hours

Physical Dimensions

•L ~ 5.24 inches (133 mm)

•W ~ 4.76 inches (121 mm)

•H ~ 0.71 inches (18mm

Temperature

•Operating: 0ºC to 60ºC (32ºF to 140ºF)

•Storing: -20ºC to 85ºC (-4ºF to 185ºF)

Humidity:

•5%-95%, non-condensing

Emissions:

•FCC part 15b

•UL1950-3

Warranty

•Three Years

60

Image 60

Contents LinkAirPro DWL-A520 Contents Package Contents Introduction Product Features LEDWireless Basics Standards Based Technology Installation Considerations Wireless Basics Getting Started Home Internet Network with a Residential Gateway/Router Home Internet Network with Multiple IP Addresses Home Internet Network with Multiple IP Addresses To complete this installation, please follow these steps An Ad Hoc NetworkAn Ad Hoc Network with Internet Sharing Install your Internet Sharing Software Using the Configuration Utility General TabFrame Statistics Tab Transmit Retries Tab Station Tab Driver Tab On the Options menu, choose Settings \Temp\Logfile Troubleshooting Status Uncheck Hide extension for known file types click on Apply Troubleshooting Troubleshooting Using the Network Setup Wizard in Windows XP Networking BasicsNetworking Basics Enter a Computer description and a Computer name optional Networking Basics Networking Basics Networking Basics Network Setup Wizard Naming your Computer Windows XPRight-click on My Computer Select Properties and Click Computer Name Tab in the System Properties windowName Right-click on My Computer Click PropertiesSelect the Hardware Tab Click Device Manager Checking the Wireless Configuration Select Settings Click on Checking the IP Address in Windows XP Right-click on the Networking IconAssigning a Static IP Address Double-click on Control Panel Network ConnectionsProtocol TCP/IP Click OK Adding and Sharing Printers in Windows XP Adding a local printerPrinters and Faxes Click on Add a printer Select Local printer attached to this computer Select Use the following portNetworking Basics Go to Start Printers Faxes Sharing a network printer Printers and Faxes Click on Add a PrinterSelect Network Printer Select Browse for a printer You have completed adding the printer Sharing an LPR printer Add a PrinterLocal printer… Select Create a new port Click Settings Printer Name or IP AddressClick Have Disk Click Next Select Yes, to print a test Technical Specifications Other TasksPhysical Dimensions TemperatureWarranty Current ConsumptionContacting Technical Support Link Technical Support over the InternetLimited Warranty and Registration What You Must Do For Warranty ServiceWhat Is Not Covered