D-Link user manual Firmware Upgrade, DSA-3200 Support

Page 72

DSA-3200 Wireless Service Gateway User Manual

4.3.10 Firmware Upgrade

One may upgrade the DSA-3200 firmware with any later version code obtained from D-Link Systems, Inc. Support Site.

DSA-3200 Support Page

Warning: Firmware upgrade may cause user data loss. Please refer to the version description or release notes to see if there is any limitation before upgrading your firmware.

Click “Browse” to browse the local HDD for the appropriate firmware file. Upon locating the appropriate firmware image file, click “Submit” and the browser will upload the firmware file to the DSA-3200. Once the upload procedure has begun do not disconnect power or attempt to access the DSA-3200 through another interface. Doing so might interrupt the upgrade process rendering the flash image useless.

You must restart the system before the upgrade firmware is effective. If you have modified any device settings, remember to save the setting before restarting the system.

Warning: Please restart the system through the management interface. Do not turn off the system directly and then turn on the power again. Doing so may damage the upgraded firmware.

71

Image 72
Contents DSA-3200 Table of Contents Console Interface 100 Quick Installation, On-line Immediately Integrate an Existing User Password DatabaseBrief Introduction to the DSA-3200 Friendly Management and Application InterfacesThings to Consider AudienceDocument Convention Package Contents System RequirementsPower LED Solid glow when the DSA-3200 is powered on Panel Function DescriptionsDevice Physical Connections COM Port Private LAN PortsManaging the D-Link DSA-3200 Getting Started System ConceptBegin Installation Page Configuration Web-UIHome Wizard System Nmap FIN/URG/PSH WAN Configuration Page Public LAN Configuration Related Setup for Dhcp Server of Public LAN Page Public Wlan Configuration Page Page Page Page Related Setup for Dhcp Server of Public Wireless LAN Page Private LAN Configuration Related Setup for Dhcp Server of Private LAN Page Authentication Policies Advanced MenuPage Page Two Authentication Mechanisms Local Page Page Page Radius Layer 2 Authentications Page Page Page Group Configuration „ Firewall Profiles EditPage Page Black List Configuration „ Login Schedule Profiles EditTo return to the Black List Configuration, click Prev On-demand User Configuration Receipt Footer Printer BaudRate Assign to GroupPage „ Upload On-demand User Roaming Configuration Password xyz Additional Configuration „ Upload Login „ Upload Logout Img src=images/xx.jpg„ Upload Certificate Tools Menu „ POP3 MessagePort and IP Redirect Virtual Server Pass Through „ Pass Through IP Address List„ Pass Through MAC Address List Monitor IP List Page Free Surfing Area Proxy Ddns Change Password System Settings Firmware Upgrade DSA-3200 SupportStatus RestartDevice Info Admin Info LoginDescription System NameWireless port, Public and Private LAN Port InterfaceEssid of the Wireless port Channel of WirelessMAC Address MAC address of the WAN port End IP address End IP address in Dhcp IP rangeCurrent Users Traffic HistoryNotifications Page Help Confirm Functionality of User Authentication Page Page Console Interface Main Menu of Console interfaceConsole Utilities for Network Debugging Page Change admin password of Console Reload factory default of Console interfaceRestart DSA-3200 Setting up a PC to connect to the DSA-3200 1 TCP/IP Network SetupInternet Connection Setup Choose Start Control Panel Internet OptionsPage Page Windows XP Choose Start Control Panel Internet OptionPage Page Page Configure TCP/IP in Windows Select Start Console Network and Dial-up ConnectionsPage Using Static IP Address Click Advanced in the window of Internet Protocol TCP/IPPage Configure TCP/IP in Windows XP Select Start Console Network ConnectionUsing Dhcp Using Static IP Address Page Warranty Page Page Page 108 FCC Statement 0984 Link Technical Support over the Telephone Link Technical Support over the InternetRegistration
Related manuals
Manual 12 pages 48.98 Kb