DSA-3200 Wireless Service Gateway User Manual
5 Console Interface
The DB-9 interface of DSA-3200 provides two functions:
1.The DSA-3200 provides a COM interface for the administrator to handle different problems and situations that may occur during operation. To connect to the COM interface of the DSA-3200, use the included null modem cable. The terminal simulation program that you use (i.e. Hyperterminal) should be configured as 9600 baud, 8 data bits, Parity None, Stop Bits 1, Flow Control None. The main console menu is a basic interface using interactive dialog boxes. Please use the arrow keys on the keyboard to browse the menu and press the “Enter” key to select specific menus and confirm entered values.
2.The DSA-3200’s COM port can alternatively be used as a printer interface to connect a thermal line ticket printer like the DSA-3100P.
Warning: These two functions cannot be used at the same time.
5.1 Main Menu of Console interface
Once you properly connect to the serial port of the DSA-3200, the console welcome screen should appear automatically. If the welcome screen fails to appear in the terminal simulation program automatically, please try to press the “Down” arrow or “Enter” key to display the welcome screen. If you are still unable to see the welcome screen or the main menu of the console, please check the connection of the Null modem cable, verify COM port settings and setup of the terminal simulation program.
84
