D-Link DWL-510 manual IP Address

Page 12

Getting Started

Setting up a Wireless Ad Hoc Network

Install a network adapter into one computer. In the example above, the DWL-510Wireless PCI Adapter in the desktop computer is installed. See the Quick Installation Guide included with the product for installation instructions.

Install the DWL-650into a laptop computer. See the Quick Installation Guide included with the product.

Set the wireless configuration for the adapters to Ad-Hoc mode, set the adapters to the same channel, and assign an IP Address to each computer on the Ad-Hoc network. (See Box below)

IP Address

When assigning IP Addresses to the computers on the network, please remember that the IP Address for each computer must be in the same IP Address range as all the computers in the network, and the subnet mask must be exactly the same for all the computers in the network.

For example: If the first computer is assigned an IP Address of 192.168.0.2 with a Subnet Mask of 255.255.255.0, then the second computer can be assigned an IP Address of 192.168.0.3 with a Subnet Mask of 255.255.255.0, etc.

IMPORTANT: If computers or other devices are assigned the same IP Address, one or more of the devices may not be visible on the network.

12

Image 12

Contents LinkAir DWL-510 Contents Package Contents Introduction Product Features & Benefits LEDs Wireless Basics Installation Considerations Standards Based TechnologyWireless Basics Getting Started Getting Started IP Address Using the Configuration Utility Link Info Configuration IP Setting Assigning a Static IP Address Site Survey Ssid Service Set Identifier Site Survey AddAbout Troubleshooting Adapters StatusCannot connect to the access point or the wireless router Computer does not recognize the DWL-510 Wireless AdapterDWL-510 Link lights are not on Uncheck Hide extension for known file types click on ApplyPage Using the Network Setup Wizard in Windows XP Networking BasicsNetworking Basics Enter a Computer description and a Computer name Networking Basics Networking Basics Networking Basics Networking Basics Naming your Computer Windows XPComputer Select Properties and click Computer Name Tab in the System Properties windowSelect Workgroup and enter the name of the Workgroup Type Command Checking the IP Address in Windows XP/2000Control Panel Network ConnectionsArea Connections Click Properties Protocol TCP/IPClick OK Checking the Wireless Connection by Pinging For Windows XPAdding and Sharing Printers in Windows XP Adding a local printerPrinters and Faxes Click on Add a printer Select Local printer attached to this computer Select Use the following portNetworking Basics Adding a local printer Go to Start Printers Faxes Sharing a network printer Add a PrinterPrinter Select Browse for a printerNetworking Basics Sharing a network printer Network Setup Wizard on all the network computers Sharing an LPR printer Local PrinterSelect Create a new port Enter the Printer IP Address and the Port Name, as shownClick Settings Click Have Disk Order to share Printer Technical Specifications Other TasksDiagnostic LED Power SpecificationsPhysical Dimensions TemperatureContacting Technical Support Link Technical Support over the Telephone 877Link Technical Support over the Internet Warranty and Registration Page Important Note