Motorola WPCI810GP manual Field Description Network, Authentication

Configuration Section 3

Field	Description
Network	Select if your access point requires authentication. Match the
Authentication	authentication used by the network.
		Open	No authentication is used.
		Shared	The Pre-Shared Key (PSK) authentication method is
			used.
		802.1X	IEEE port based network access control authentication
			method is used.
		WPA	Wi-Fi®Protected Access (WPA) authentication
			(802.1X) is used with an EAP type.
		WPA-	WPA authentication (802.1X) is used with a
		PSK	Pre-Shared Key, which enables you to enter a static
			Network key.
		CCKM	Cisco® proprietary standard Lightweight Extensible
			Authentication Protocol (LEAP).

Note: If you select WPA, WPA-PSK, or CCKM, you may be required to enter further information on the Authentication tab. Ask your network administrator for additional information.

Data Encryption Select the type of security encryption algorithm used. The available types of encryption are based on the type of the authentication selected.

Disabled	No encryption. Available only with Open and Shared
	authentication.
WEP	Deselect Network Key is provided for me
	automatically and enter the Key provided by the
	network. Available only with Open, Shared, 802.1X,
	and CCKM Authentication.
TKIP	Available with WPA, WPA-PSK, and CCKM
	Authentication.
AES	Available with WPA and WPA-PSK Authentication.
CKIP	Available with CCKM (Cisco Centralized Key
	Management) Authentication.

Network key Enter the security key for data encryption, when WEP or WPA-PSK is selected. This can be entered in ASCII or hexadecimal for WEP and in ASCII for WPA-PSK.

WPCI810 3-7