Setting Up Your Modem
11.The Add RAS Device window opens. Ensure the COM port for your iM1100 Wireless Modem is selected from the
12.The Remote Access Setup window now shows the added COM port. Verify that the iM1100 Wireless Modem was added to the list of RAS devices, verify that TCP/IP is the only dial out network protocol. Then click Continue.
13.In the Network Services Selection window, click Close.
14.The Network Settings Change window opens prompting you to restart your laptop. Click Yes to restart.
15.When the welcome window opens, follow the steps in “Completing the Installation” on page 20.
19