English
4
Allegro_CID.book Page 4 Tuesday, January 15, 2008 3:07 PM
Over time, as the batteries wear out, the charge capacity will reduce, so reducing the talk/standby time of the handset.
Eventually the batteries will need to be replaced.
Setting the date and time
The phone uses the 12 or 24 hour clock.
In standby mode:
1.Press 
.
2.Press 
or 
to select "HS SETTINGS" and press 
.
3.Press 
or 
to select "DATE & TIME" and press 
.
4.Press 
or 
to select "DATE FORMAT" and press 
.
5.Press 
or 
to select "MM - DD" or "DD - MM" and press 
.
6.Press 
or 
until "TIME FORMAT" is displayed and press 
.
7.Press 
or 
to select "24 - HOUR" or "12 - HOUR" and press 
.
8.Press 
or 
until "SET TIME" is displayed and press 
.
9.Enter Hour and Minute using the keypad, and press 
.
Connecting the telephone line cord
Connect the telephone line cord into the TEL LINE socket on the back of the base. Connect the telephone line cord adapter to the other end and plug into the telephone wall socket.
Only use the telephone line cord supplied or your phone may not work correctly.
Setup is now complete. You can make and receive calls on your phone.
2. Your Handset
Controls & Functions
Handset
Speaker (back)
Up/down
Earpiece/Receiver 
Menu/OK
Display
Hook
Cancel 
Speaker/Pause
Phonebook
Intercom
Redial/Flash
Temporary Tone | #/Lock |
Microphone