ON/OFF operation button

This button is for turning the air conditioner on and off.

Temperature setting buttons (TEMP.)

Press the button to increase the set temperature.

Press the button to reduce the set temperature.

The temperature setting changes by 1 °C each time one of the TEMP. buttons is pressed. The set temperature appears in the display for only 3 seconds.

FLAP button

Press this button either to select the setting of the airflow direction to the auto. flap in each mode or one of the six possible positions manually or to select the sweep function which moves the flap up and down automatically.

: Auto flap setting: If selected in a cooling or dry operation, the flap is set at position (7) in the following chart.

: The airflow direction can be set manually. (six positions)

: The flap moves up and down automatically.

NOTE

When you press the FLAP button, the air flow direction will be changed one by one as follows.

SWEEP

CANCEL button

After using the TIMER ON button or TIMER OFF button to set the timer, press this button to cancel the setting.

Jumper wire for address switching

The address switch changes to prevent mixing of signals from remote control units when two air conditioners are installed next to each other.

For more information, please contact the dealer where you made the purchase.

Back side of remote control unit (Cover removed)

OI-018-7-EG

7

 

Page 59
Image 59
Sanyo Sanyo Split System Air Conditoner, SAP-K77RAX ON/OFF operation button, Temperature setting buttons Temp, Flap button