Sanyo Sanyo Split System Air Conditoner Remote Control Unit Installation Position, Rear side, Fig

Models: Sanyo Split System Air Conditoner SAP-K77RAX

1 68
Download 68 pages 41.42 Kb
Page 35
Image 35
7-3. Remote Control Unit Installation Position

7-3. Remote Control Unit Installation Position

The remote control unit can be operated from either a non-fixed position or a wall-mounted position.

To ensure that the air conditioner operates correctly, do not install the remote control unit in the following places:

In direct sunlight

Behind a curtain or other place where it is covered

More than 8 m away from the air conditioner

In the path of the air conditioner’s airstream

Where it may become extremely hot or cold

Where it may be subject to electrical or magnetic interference

Where there is an obstacle between the remote control unit and the air conditioner (since a check signal is sent from the remote control unit every 5 minutes)

7-3-1. Mounting on a Wall

Before mounting the remote control unit, press the ON/OFF operation button at the mounting location to make sure that the air conditioner operates from that location. The indoor unit should make a beeping sound to indicate that it has received the signal.

Rear side

Insert the remote

To remove the

control unit from

remote control unit,

the top.

slide it upward.

Hole

Mounting screws 4 7-3-1. Mounting on a Wall16 (included) Remote control unit mount

Fig. 7

*To prevent loss of the remote control unit, you can connect the remote control unit to the mount by passing a string through the remote control unit and attachment hole.

35

Page 35
Image 35
Sanyo Sanyo Split System Air Conditoner Remote Control Unit Installation Position, Mounting on a Wall, Rear side, the top