OPERATION WITH THE REMOTE CONTROL UNIT 
1. Operation
STEP 2
STEP 1
STEP 3
STEP 5
STEP 4
NOTE | Check that the circuit breaker on the power panel is | ||
|
| turned on. |
|
|
|
| |
|
| Press the setting buttons as described below and | |
|
| change the settings as desired. |
|
|
|
| |
|
| STEP 1 Press the MODE selector button and | |
|
| select the desired mode. |
|
|
| For cooling operation | → |
|
| For dehumidifying operation → | |
|
| For fan only operation | → |
|
|
| |
|
| STEP 2 To start the air conditioner, press the ON/ | |
|
| OFF operation button. |
|
|
|
| |
|
| STEP 3 Press the TEMP. setting buttons to | |
|
| change the temperature setting to the | |
|
| desired temperature. The set temperature | |
|
| appears in the display for only 3 seconds. | |
|
| Adjustable temperature range: | |
30°C max.
16°C min.
STEP 4 Set the FAN SPEED selector button to the setting you want.
STEP 5 Press the FLAP button and set the airflow direction as desired.
(Refer to “ADJUSTING THE AIRFLOW DIRECTION” on page 13.)
To stop the air conditioner, press the ON/OFF operation button again.
NOTE • Choose the best position in the room for the remote control unit, which also transmits the operating instructions. Once you’ve found this best position, always keep the remote control unit there.
•This appliance has a
2. Adjusting the Fan Speed
A. Automatic fan speed
Simply set the FAN SPEED selector button to the 
position.
This automatically sets the best fan speed for the room temperature.
B. Manual fan speed
If you want to adjust fan speed manually during operation, just set the FAN SPEED selector button as desired. [ 
, 
, or 
]
3. Fan Only
STEP 2
STEP 1
STEP 3
If you want to circulate air without any temperature control, follow these steps:
STEP 1 | Press the MODE selector button to switch | |
| to the fan mode | . |
|
| |
STEP 2 | Press the ON/OFF operation button. | |
STEP 3 Press the FAN SPEED selector button to select the fan speed of your choice ( 
, 
or 
).
9 | |
|
