Addonics Technologies WDAUSM-P manual Initial Setup

Page 4

Initial Setup

Initial Setup

1.Prepare storage.

-Choose a MicroSD card or USB storage.

-Make sure the storage device is formatted with one partition, FAT32

or FAT64 (exFAT).

NOTE: FAT32 may be used for storage capacity up to 2TB. FAT64 may be used for storage capacity up to 4TB. USB hard disks with large sector size will not be compatible. Most retail USB hard disks larger than 2TB will have the large sector size.

2.Connect one storage to the WiFi Drive Adapter.

-The WiFi Drive Adapter only supports one storage device at a time.

-If a MicroSD and USB storage are attached, only the MicroSD will work.

-The unit will not support multiple USB storage devices or hubs.

-If a USB storage device with independent power is connected, use the storage device's power supply to power it.

3.Connect the unit to a router using the provided ethernet cable if desired.

4.Connect power to the unit.

5.Use a wireless device with a web browser to connect to the WiFi Drive Adapter.

-Use the Wireless settings on the device to locate the network.

-The WiFi Drive Adapter's default Wireless network name will be “Addonics_WDA” followed by some numbers.

-The default wireless password is “12345678”

-This step may be skipped if the unit is connected to a router using ethernet.

The following steps are optional if customization is desired:

6.Open a web browser and connect to the WiFi Drive Adapter's Web Interface.

-If connected using wireless, type 192.168.99.1 into the address bar and press Enter.

-If connected using ethernet, refer to your router's DHCP Clients table to discover the WiFi Adapter's IP address. The unit's default hostname will be “Addonics_WDA” followed by some numbers. Type that IP address into the address bar on the web browser (instead of 192.168.99.1) and press Enter.

-The web interface will ask for a username and password. Type “admin” into both (without the qoutes).

7.Change the device name if desired.

-This will be the unit's Wireless Network name, as well as its Windows Network name.

-This setting is found in the “System Setting” menu.

8.Change the Web Interface password if desired (recommended):

www.addonics.com

Technical Support (M-F 8:30am - 6:00pm PST)

Phone: 408-453-6212

Email: www.addonics.com/support/query/

Image 4
Contents User Guide Overview Network Cable Initial Setup Using the WebDAV Interface Locating the WiFi Drive Adapter on the networkUsing the SMB Server WiFi Drive Adapter Menus Wireless Network Menu WAN Setting MenuUtility Menu UI Setting MenuWebShare Menu