Wireless Network Menu

un-check “Sync from internet,” then either change the date and time fields to the settings desired, or click “Sync from your device” to set the time based on the computer or device you are using to change the settings.

Power Saving: The WiFi Drive Adapter includes a sleep mode, which places the unit and storage into low power mode. This can be set to None, leaving the unit active at all times, or a selection of 5 minutes, 10 minutes, or 30 minutes.

Reboot: this causes the WiFi Drive Adapter to restart.

Shutdown: this option sets the unit immediately into low power mode.

Security: this option may be used to enable or disable WPA2 password protection for the WiFi Drive Adapter's wireless network, and if enabled, the password may be changed here. The default password is “12345678.” Internet Access: this option may be used to enable or disable using the WiFi Drive Adapter with a wireless Router to connect to the Internet. When enabled, a list of available wireless networks is shown. Only networks with no authentication or WPA2 authentication with 8 or 13 character passwords are supported. This option has no effect if the WiFi Drive Adapter is connected to a router using an ethernet cable.

WiFi Channel: this option is used to select the WiFi Drive Adapter's wireless network channel. This setting applies to the unit's wireless network, not the Internet Access wireless network connection.

WAN Setting Menu

This menu is used to configure the WiFi Drive Adapter's ethernet connection to a router. By default, the unit will connect using DHCP, and acquire settings

www.addonics.com

Technical Support (M-F 8:30am - 6:00pm PST)

Phone: 408-453-6212

Email: www.addonics.com/support/query/