For more detailed documentation, visit us online at www.adtran.com.
®
NetVanta ADSL Network Interface Module (ADSL over ISDN) P/N 1200889E1/L1
Quick Start Guide
INSTALLATION INSTRUCTIONS
| DBU | 1. | Remove power from the base unit. | ||||||||
|
|
|
|
|
|
|
|
| |||
|
|
|
|
|
|
|
|
| 2. | Slide the option module into the option slot until the module is | |
|
|
|
|
|
|
|
|
| |||
|
|
|
|
|
|
|
|
|
| firmly seated against the chassis. | |
|
|
|
|
|
|
|
|
| 3. | Secure the pins at both edges of the module. | |
|
|
|
|
|
|
|
|
| |||
|
|
|
|
|
|
|
|
| |||
|
|
|
|
|
|
|
|
| |||
SPECIFICATIONS |
|
|
| 4. | Connect the cables to the associated device(s). | ||||||
|
|
| 5. | Complete installation of the base unit. | |||||||
ADSL Interface ADSL over ISDN, Annex B | |||||||||||
6. | Restore power to the unit. | ||||||||||
| Supported Standards: | ||||||||||
|
|
| |||||||||
| Connector: |
|
| ||||||||
| Dying Gasp (NetVanta 3200 only) |
| For NetVanta modules with outside plant | ||||||||
ATM | Multiple Protocol over AAL5 (RFC2684) |
| connections, ensure that all cables are | ||||||||
| PPP over ATM (RFC2364) |
| removed from the module before installing | ||||||||
| PPP over Ethernet (RFC2516) |
| |||||||||
|
| or removing it from the NetVanta chassis. | |||||||||
| ATM Forum UNI 3.1/4.0 PVC |
| |||||||||
| ATM Class of Service (UBR) |
|
| ||||||||
| ATM F5 OAM |
|
|
|
| ||||||
| Up to 16 Virtual Circuits |
|
|
| |||||||
|
|
|
|
|
|
Compliance | FCC Part 15 Class A, EN 55022 Class A, EN 55024, |
| EN |
| AS/ACIF S043 |
| EN 60950, IEC 60950, AS/NZS 60950 |
| RoHS compliant, Telecommunications Exemption |
| (1200889E1 only) |
Physical | Dimensions: |
| Operating Temperature: 0°C to 50°C |
| Storage Temperature: |
| Relative Humidity: Up to 95 percent, noncondensing |
NetVanta modules should be installed only in NetVanta Series products.
Pin | Name | Description |
|
|
|
1, 2 | — | Unused |
3 | R | Network - Ring |
4 | T | Network - Tip |
5, 6 | — | Unused |
An optional Dial Backup Interface Module (DIM) is required for dial backup applications.
For a description of the DBU pinouts, refer to the Quick Start Guide included with your DIM shipment.
Important: For additional details on product features, specifications, installation, and safety, refer to the appropriate Hardware Installation Guide on the ADTRAN OS System Documentation CD shipped with the base unit and available online at www.adtran.com.
Quick Start Guide, | ADTRAN Technical Support | Copyright © 2006 ADTRAN, All Rights Reserved |