ADTRAN T200 IDSL warranty Terminal Modes Menu Manual Update Mode, REAL-TIME Update Mode

To conduct a terminal session, connect a VT100 or compatible test set to the OCU-R via the front panel DB-9 connector, then press the space bar three times to initiate the session. The Main Menu will appear, as illustrated in Figure 9.

The Main Menu provides access to detailed performance and configuration information.

A Terminal Modes Menu is available for configuring the craft interface for a manual terminal update or a real-time terminal update. Figure 10 shows the Terminal Modes Menu.

NOTE

Real-time terminal update is recommended for normal terminal operation unless screens are to be captured or logged to a print file.

CIRCUIT ID:IDSL Test Unit	07/25/00 02:14:40
	Adtran IDSL Main Menu
1.	Status
2.	Loopbacks
3.	Performance Monitoring
4.	Event Log
5.	Set Circuit ID
6.	Set Date and Time
7.	Adtran Information
8.	Terminal Modes

Selection:
Figure 9. Main Menu Screen
CIRCUIT ID:IDSL Test Unit	07/25/00 02:39:56
TERMINAL MODES MENU
MANUAL UPDATE MODE:

*You can print or log screens

*No text is highlighted

*“Ctrl+R to Update” appears at the top of each screen, reminding you to press both the ‘Ctrl’ and ‘R’ keys to update the screen

*There is a delay between screen changes & updates

*After 30 min. of no interaction, a new baud rate search is begun

*Ignores input until screen is finished printing

REAL-TIME UPDATE MODE:

*Faster of the two modes

*You cannot print screens to a log file

*Highlighting is enabled

*Recommended for daily operation

Press <SPACEBAR> to toggle update modes

Figure 10. Terminal Modes Menu Screen

61220010L2-5C 61220010L2-5, Issue 3 9