For Front Effects Speakers
The BP1.2X and BP2X are ideal for use as front effects speakers in DSP installa- tions. They should be placed on the front wall with the wire terminals against the wall and the speakers separated by approximately
Mounting the BP1.2X and BP2X
Each BP1.2X and BP2X comes with a premounted mounting plate which may be used to hang the speakers on the wall. Use a toggle bolt or other similar anchored fastener in the wall to hold the screw which the mounting plate will hang on. Do not use an unanchored screw in the wall.
Technical Assistance
It is our pleasure to offer assistance if you have any questions regarding your BP1.2X and BP2X or their setup. Please contact your nearest Definitive Technology dealer or contact us directly at
Service
Service and warranty work on your Definitive loudspeakers will normally be per- formed by your local Definitive Technology dealer. If, however, you wish to return the speaker to us, please contact us first, describing the problem and requesting authorization as well as the locations of the nearest factory service center.
Please note that the address given in this booklet is the address of our offices only. Under no circumstances should loudspeakers be shipped to our offices or returned without contacting us first and obtaining return authorization.
Definitive Technology Offices
11433 Cronridge Drive
Owings Mills, Maryland 21117
Phone:
Visit us at www.definitivetech.com