ADTRAN user manual T1 ESF CSU ACE Menu Tree

T1 ESF CSU ACE User Manual Chapter 3. Operation

MAIN MENU

	1)NI PERF RPTS			RESET PERF CNTRS
				SES
		LOSS OF SIGNAL		ES
		AIS ALARM		%AV
	2)NI ERR/ALM	OUT OF FRAME	CLEAR HISTORY	%EF
		YELLOW ALARM	LOSS OF SIGNAL	CVS
1)STATUS		RED ALARM	AIS ALARM
		CODE VIOLATIONS	OUT OF FRAME
		BIPOLAR VIOLATIONS	YELLOW ALARM	1)FORMAT
		FRAME BIT ERRORS	RED ALARM	2)CODE
			CODE VIOLATIONS	3)YEL ALRM
	3)NI HIST		BIPOLAR VIOLA-	4)XMIT PRM
			TIONS
	4)T1 ERR ALM*		FRAME BIT	5)KEEP ALIVE
			ERRORS
	5)T1 HISTORY**			6)BIT STUFFING
				7)SET LBO
	1)NETWORK (NI)			8)NET LB
				9)ROB BIT SIG
			1)MODEM INIT	10)RBS START
	2)UNIT	1)CONTROL PORT	2)DATA RATE	11)RBS END
2)CONFIG		2)ALARMS	1)TRAPS
			2)OUTPUT	1)FORMAT
			3)TEL NUM	2)CODE
	3)TERMINAL (T1)			3)SET LBO
3)UTIL	1)SOFTWARE REV (Dis-
	plays current s/w rev)
	2)REINIT UNIT
	3)ADDRESS
		1)REMOTE UNIT (Select
	4)SET PASSCODE	remote unit type)
	5)FACT RESTORE (Returns
	all configs to factory settings)	2)SHELF SNMP ID:	NO LOOPBACK
	7)REMOTE T-WATCH	3)SHELF SLOT:	DTE ON
			LINE ON	NO LOOPBACK
	1)LOCAL LOOPBACK		PAYLOAD ON	AT&T INBAND LLB
				ANSI FDL LLB
4)TEST	2)REM LB			AT&T FDL PLB
			NO PATTERN
	3)TEST PATTERN		ALL ZEROS
			1:8 ALL DS0s
			ALL ONES
	4)RUN SELFTEST

*T1 ERR/ALM has same menu sub-branches as NI ERR/ALM. **T1 HISTORY has same as NI HISTORY.

Figure 3-7. T1 ESF CSU ACE Menu Tree

61204025L1-1B © 2004 ADTRAN, Inc 37