T1 ESF CSU ACE User Manual | Chapter 3. Operation |
|
|
| 1)SOFTWARE REV |
| (Displays current software rev.) |
|
| ||
|
|
|
|
|
|
|
|
| 2)REINIT UNIT |
|
|
|
|
| |
|
|
|
|
|
|
|
|
3)UTIL | 3)ADDRESS |
|
|
|
|
| |
|
|
|
|
|
|
|
|
| 4)SET PASSCODE |
|
|
|
|
| |
|
|
|
|
|
|
|
|
| 5)FACT RESTORE |
| (Returns all configurations to |
|
| ||
|
|
|
| factory settings.) |
|
| |
|
|
|
|
|
|
|
|
| 6)REMOTE |
| 1)ACCESS TYPE |
| (Select remote unit type.) | ||
|
|
| |||||
|
|
|
|
|
|
|
|
|
|
|
| 2)SHELF SNMP ID: |
|
| |
|
|
|
|
|
|
|
|
|
|
|
| 3)SHELF SLOT: |
|
| |
|
|
|
|
|
|
|
|
Figure 3-17. Utility Menu Tree
1)SOFTWARE REV, Submenu of 3)UTIL
Use this submenu to display the current software revision level. This information is required when requesting assistance from ADTRAN Customer Service or when updates are needed. The top line gives the revision of interest. The bottom line displays information of use to ADTRAN only.
Follow standard operating procedures to access the 3)UTIL menu items.
2)REINIT UNIT, Submenu of 3)UTIL
Use this submenu to
3)ADDRESS, Submenu of 3)UTIL
Use this submenu to access the current Unit Address setting. Unit identification numbers must be between 000 and 999. See Figure
Figure 3-18. Re-initialize Unit/Address Screen
4)SET PASSCODE, Submenu of 3)UTIL
Use this submenu to access the passcode setting needed to control port access. The Unit Identification number is limited to four digits between 0001 and 9999.
5)FACT RESTORE, Submenu of 3)UTIL
Use this submenu to restore factory default settings for all unit parameters. This restores all parameters to the factory settings.
| © 2004 ADTRAN, Inc | 47 |