3Com WL-455 manual Using AN Optional POWER-OVER-ETHERNET Injector

Page 18

USING AN OPTIONAL POWER-OVER-ETHERNET INJECTOR

CAUTION: To avoid damaging network equipment, make sure that the cables are

!connected from access point to power supply to LAN as shown above and described below.

The Power-Over-Ethernet Injector can be located at any point between the access point and the LAN access port, wherever a convenient power outlet exists. If you supply your own Ethernet cable for connecting power, be sure that it is standard category 5 straight-through (8-wire) cable that has not been altered in any way. Use of nonstandard cable could damage the access point.

Refer to the illustration below, and follow these steps:

1Connect one end of the Ethernet cable to the Ethernet port on the access point.

2Connect the other end of the Ethernet cable to the port labeled To Access Point on the power supply.

3Connect the power cord to the power supply and plug the cord into a power outlet.

4To link the access point to your Ethernet network, plug one end of another Ethernet cable into the port labeled To Hub/Switch on the power supply, and plug the other end into a LAN port (on a hub or in a wall).

Using an Optional Power-over-Ethernet Injector

Using an Optional Power-over-Ethernet

 

LAN Port

16

Image 18
Contents Wireless LAN Access Point 3Com Corporation 350 Campus Drive Marlborough, MA Contents Troubleshooting Regulatory Compliance Information Product Features SecurityManageability Wireless Network StandardPerformance and Reliability FAR-REACHING 802.11GNetwork Configuration and Planning AD HOC Wireless LANInfrastructure Wireless LAN Infrastructure Wireless LAN for Roaming WirelessPCS Terminology Seamless RoamingPage Installing the Access Point Installation RequirementsPower Requirements Safety InformationPage Before YOU Begin Connecting the Standard Antennas Connecting PowerUsing the Included AC Adapter Using AN Optional POWER-OVER-ETHERNET Injector Using a POWER-OVER-ETHERNET LAN Port Checking the LedsMounting on a Wall Flat Surface Installation Selecting and Connecting a Different Antenna Model Important NotesDio Eth Power ernet Power Settings on the Access Point for External Antennas USAInstalling Software Utilities Using the 3COM Wireless Device Manager Launching a Wireless Device ConfigurationClick Configure Configuration Login Setting the Country CodeUsing the PRE-IP Configuration Wizard Basic Setup Advanced Setup IdentificationDhcp Client Radius Secure WEB Server ConnectionAuthentication Field Default Description Field Default Description Filter Control Filtering by VlanClient List Timeout Security FiltersUplink Port MAC Address Filtering Snmp Filtering by Ethernet Protocol TypeAdministration System LOG Status Radio Settings Radio InterfacePage Configuring Authentication SecurityWPA Configuration Configuring EncryptionWEP Configuration HOW to Setup the Access Point for Radius Authentication Select Advanced SetupSelect Advanced Setup HOW to Setup the Access Point for WPA with PRE-SHAREDPSK KEYWPA Configuration for Windows XP WEPWPA-PSK AES Troubleshooting Click Configure Client service area to match Technical Support Obtaining Support for Your ProductAccess Software Downloads Contact US Telephone Technical Support and RepairCountry Telephone Number North America Telephone Regulatory Compliance Information Industry Canada IC Emissions Compliance Statement Safety Compliance Notice Index Page WEP Page Radius Vlan ID
Related manuals
Manual 81 pages 34.4 Kb

WL-455 specifications

The 3Com WL-455 is a versatile wireless access point designed to meet the needs of small to medium-sized enterprises. Renowned for its robust performance, this device is a critical component for businesses looking to enhance their wireless network capabilities.

One of the standout features of the WL-455 is its ability to support both 802.11b and 802.11g wireless standards. This dual compatibility allows organizations to maintain connectivity with a broad range of devices, ensuring high-speed internet access while reducing the risk of obsolescence as new technologies emerge. The WL-455 supports data rates of up to 54 Mbps, providing sufficient bandwidth for most applications utilized in a business environment.

Security is paramount in today's digital world, and the WL-455 excels in this area. It offers advanced security features including WEP, WPA, and WPA2 encryption protocols, offering multiple layers of protection for sensitive data transmitted over the wireless network. This ensures that employees can connect to the network securely, minimizing the risks posed by potential threats.

In terms of management and installation, the 3Com WL-455 is designed for ease of use. It includes a streamlined web-based interface, which simplifies the process of configuring network settings. Additionally, the device supports Power over Ethernet (PoE), enabling network administrators to deploy the access point without needing external power sources, reducing cabling clutter and simplifying setups.

The WL-455 is also equipped with a feature called Quality of Service (QoS), which prioritizes network traffic to ensure that critical applications receive the necessary bandwidth during peak usage times. This is particularly important for businesses that rely on real-time applications, such as VoIP or video conferencing, where latency and packet loss can severely impact performance.

With a sleek and compact design, the 3Com WL-455 can be easily mounted on ceilings or walls, allowing for flexible placement options within any office environment. Its durable construction ensures that it can withstand the rigors of daily use while maintaining optimal performance.

Overall, the 3Com WL-455 is a powerful solution for organizations aiming to implement a reliable and secure wireless network. With its range of features, user-friendly management tools, and robust security measures, it emerges as an excellent choice for businesses looking to improve their connectivity and efficiency in an increasingly wireless world.