3Com WL-455 manual Authentication

Page 32

See below for recommended steps in configuring RADIUS Authentication.

In the RADIUS Authentication section, enter the required parameters for a primary and secondary RADIUS authentication server.

In the RADIUS Accounting section, click the Enable radio button, then enter required parameters for a primary and secondary RADIUS accounting server.

When you are finished configuring items on this page, click Apply.

The parameters are described below.

IP Address—The address of the server.

Port—The network (UDP) port of the server used for messages. The port defaults to 1812 (1813 for RADIUS Accounting) and must match the port configured on the RADIUS server.

Key—The encryption key is a shared ASCII string that is used to authenticate logon access for the client. The maximum length is 255 characters. Do not use blank spaces in the string. The key must be configured the same on both the access point and the RADIUS server. The Authentication and Accounting RADIUS servers can have different secret keys.

Timeout—The number of seconds the access point waits for a reply from the RADIUS server before it resends the request.

Retransmit attempts—The number of times the access point will try to authenticate logon access.

Update Interval— (RADIUS Accounting Only) This is the interval in seconds between accounting updates sent to the RADIUS accounting server.

Accounting Log Options— (RADIUS Accounting Only) This option controls which clients will generate accounting logs. If set to RADIUS Authenticated Clients Only, only those clients which successfully complete 802.1x Authentication will generate accounting logs. The default is for all authenticated clients to generate accounting logs.

AUTHENTICATION

The Authentication page allows you to configure the type of upper-layer authentication the access point uses for wireless clients. Access is checked against the MAC Address authentication database stored on the access point.

NOTE: This level of authentication occurs BEFORE any 802.1x authentication configured on the Security page. When using Local and RADIUS MAC

30

Image 32
Contents Wireless LAN Access Point 3Com Corporation 350 Campus Drive Marlborough, MA Contents Troubleshooting Regulatory Compliance Information Product Features SecurityWireless Network Standard Performance and ReliabilityManageability FAR-REACHING 802.11GNetwork Configuration and Planning AD HOC Wireless LANPCS Infrastructure Wireless LANInfrastructure Wireless LAN for Roaming Wireless Terminology Seamless RoamingPage Installing the Access Point Installation RequirementsPower Requirements Safety InformationPage Before YOU Begin Connecting the Standard Antennas Connecting PowerUsing the Included AC Adapter Using AN Optional POWER-OVER-ETHERNET Injector Using a POWER-OVER-ETHERNET LAN Port Checking the LedsMounting on a Wall Flat Surface Installation Selecting and Connecting a Different Antenna Model Important NotesDio Eth Power ernet Power Settings on the Access Point for External Antennas USAInstalling Software Utilities Using the 3COM Wireless Device Manager Launching a Wireless Device ConfigurationClick Configure Using the PRE-IP Configuration Wizard Configuration LoginSetting the Country Code Basic Setup Dhcp Client Advanced SetupIdentification Radius Secure WEB Server ConnectionAuthentication Field Default Description Field Default Description Filter Control Filtering by VlanUplink Port MAC Address Filtering Client List TimeoutSecurity Filters Snmp Filtering by Ethernet Protocol TypeAdministration System LOG Status Radio Settings Radio InterfacePage Configuring Authentication SecurityWPA Configuration Configuring EncryptionWEP Configuration HOW to Setup the Access Point for Radius Authentication Select Advanced SetupSelect Advanced Setup HOW to Setup the Access Point for WPA with PRE-SHAREDPSK KEYWPA Configuration for Windows XP WEPWPA-PSK AES Troubleshooting Click Configure Client service area to match Technical Support Obtaining Support for Your ProductAccess Software Downloads Contact US Telephone Technical Support and RepairCountry Telephone Number North America Telephone Regulatory Compliance Information Industry Canada IC Emissions Compliance Statement Safety Compliance Notice Index Page WEP Page Radius Vlan ID
Related manuals
Manual 81 pages 34.4 Kb

WL-455 specifications

The 3Com WL-455 is a versatile wireless access point designed to meet the needs of small to medium-sized enterprises. Renowned for its robust performance, this device is a critical component for businesses looking to enhance their wireless network capabilities.

One of the standout features of the WL-455 is its ability to support both 802.11b and 802.11g wireless standards. This dual compatibility allows organizations to maintain connectivity with a broad range of devices, ensuring high-speed internet access while reducing the risk of obsolescence as new technologies emerge. The WL-455 supports data rates of up to 54 Mbps, providing sufficient bandwidth for most applications utilized in a business environment.

Security is paramount in today's digital world, and the WL-455 excels in this area. It offers advanced security features including WEP, WPA, and WPA2 encryption protocols, offering multiple layers of protection for sensitive data transmitted over the wireless network. This ensures that employees can connect to the network securely, minimizing the risks posed by potential threats.

In terms of management and installation, the 3Com WL-455 is designed for ease of use. It includes a streamlined web-based interface, which simplifies the process of configuring network settings. Additionally, the device supports Power over Ethernet (PoE), enabling network administrators to deploy the access point without needing external power sources, reducing cabling clutter and simplifying setups.

The WL-455 is also equipped with a feature called Quality of Service (QoS), which prioritizes network traffic to ensure that critical applications receive the necessary bandwidth during peak usage times. This is particularly important for businesses that rely on real-time applications, such as VoIP or video conferencing, where latency and packet loss can severely impact performance.

With a sleek and compact design, the 3Com WL-455 can be easily mounted on ceilings or walls, allowing for flexible placement options within any office environment. Its durable construction ensures that it can withstand the rigors of daily use while maintaining optimal performance.

Overall, the 3Com WL-455 is a powerful solution for organizations aiming to implement a reliable and secure wireless network. With its range of features, user-friendly management tools, and robust security measures, it emerges as an excellent choice for businesses looking to improve their connectivity and efficiency in an increasingly wireless world.