3Com XLPCI manual Novell NetWare Server Driver

Page 29

Novell NetWare Server Driver

2-11

6When the auto installation process is completed, remove EtherDisk diskette 1 and reboot the PC.

If you are running Windows 3.1x, after you connect to the NetWare server, run the INSTALL.EXE program for full Windows support. INSTALL.EXE gives you a full complement of NetWare requester installation ﬁles. Contact your network administrator to obtain this NetWare utility.

If problems occur only when you run AutoLink software, display or print the AUTOLINK.LOG ﬁle. This ﬁle contains a list of all events that occur during the AutoLink installation and conﬁguration process.

■To display the ﬁle, enter: type autolink.log more

■To print the ﬁle, enter: print autolink.log

Novell NetWare Server Driver

This section describes how to install the Novell NetWare driver on a Novell server running NetWare 3.12, 4.10, or

4.11.The NetWare 3.11 server is not supported by the 3C900B NIC.

The \NWSERVER directory on EtherDisk diskette 1 contains the network driver ﬁle (3C90X.LAN) to be used for servers running NetWare 3.12, 4.10, and 4.12. The NetWare Loadable Modules (NLMs) are additional ﬁles that are required for servers running NetWare 4.10 or 4.11. NLM ﬁles are also on EtherDisk diskette 1 in the same directory.

Obtain the most current NLMs from Novell.

NetWare 3.12

Follow these steps to install the driver in a

NetWare 3.12 server:

1Obtain the MSM31X.NLM, ETHERTSM.NLM, and NBI31X.NLM ﬁles from Novell and copy them to the directory on your hard disk where other NLM ﬁles are located.

2Copy the LAN driver ﬁle (3C90X.LAN) from EtherDisk diskette 1 to the same directory.

Image 29

Contents EtherLink XL PCI 10 Mbps Network Interface Cards User Guide 3Com Corporation 5400 Bayfront Plaza Santa Clara, California Contents Changing Configuration Settings Troubleshooting Network Connection Problems Page Figures Tables If you are looking for Turn to About this GuideFinding Speciﬁc Information in This Guide Icon Description ConventionsConvention Description Bold-face typeNetwork Interface Card InstallingMaximum Preparing for InstallationNIC Model Cable Connector Transceiver Network Segment Inserting the NIC 2Installing the 3C900B NIC RJ-45 Port Connecting to the NetworkBNC Port 4Connecting to the BNC Port on the 3C900B-COMBO NICAUI Port 5Connecting to the AUI Port on the 3C900B-COMBO NICMeaning RJ-45 Interpreting the Link LEDState OffWindows Network DriverSpeciﬁed ﬁelds of the Identiﬁcation tab screen, enter Windows 95 BuildClick Yes Enter your user name and password, and then click OKClick Close Click Finish Windows 95 OSR2Insert EtherDisk diskette 2 in drive a and click Next Windows 95 prompts you to reboot Windows NT Conﬁrming InstallationClick Add Windows NTClick the Adapters tab 8CHAPTER 2 Installing the Network Driver Click Add Adapter Click Close Click OK in the Network Settings windowRunning AutoLink Software Novell NetWare Client DriverNetWare Novell NetWare Server DriverMultiple NICs Save and exit the ﬁle, and then reboot the serverNetWare 4.10 3c90xcfg.exe Network Text File Name Network Driver Name Operating System Supported Network DriversRunning Diagnostic Programs Troubleshooting3Com NIC Diagnostics Program 3Com DOS Diagnostic ProgramRunning NIC Tests Double-click the 3Com icon in the Windows system tray13Com NIC Diagnostics General Screen Click the Diagnostics tabRunning the Echo Test Click StartOn the sending PC On both PCsOn the responding PC Close all open windows when the Echo test is ﬁnished 63Com NIC Diagnostics Support Screen 3Com Support ServicesClick the Support tab Accessing the Help SystemWindows 95 and Windows NT Removing NIC SoftwareQuestionAnswer Frequently Asked QuestionsQuestion Answer Make sure that your IP protocol does not compute the CRC Fast IP is designed to bypass the router, particularly where Page Option Default Setting Available Settings Changing Configuration SettingsDisplaying Conﬁguration Settings Using the DOS Conﬁguration ProgramRunning the 3Com NIC Diagnostics Program Running the 3Com NIC Diagnostics Program 33Com NIC Diagnostics Properties Screen Changing Conﬁguration SettingsEnabling Pace Support 43Com DynamicAccess Setup ScreenPage Cabling Requirements SpecificationsSpeciﬁcations Category Use Twisted-Pair Cable10BASE-T Operation 10BASE-T Speciﬁcations RJ-45 Connector Pin AssignmentsPage Concurrent UDP Streams Operational SettingsFifo Packet Threshold Option Descriptions Disable Switch Packet PrioritizationLow-Priority Ratio Natural Packet IntervalDisable Receive Packet Buffering Changing Operational SettingsChanging Ranges and Protocols Connect a straight-through cable from the PC to the hub Troubleshooting Network Connection ProblemsEliminating Potential Causes of Problems Crossover cable Troubleshooting Hubs with Crossover CableSupport from Your Network Supplier Online Technical ServicesWorld Wide Web Site 3Com Bulletin Board ServiceAccess by Analog Modem Access by Digital Modem 3ComFacts Automated Fax Service408 654 408 727Page Numbers IndexLANSRV.TXT 10BASE-TA-3 Page 3Com Corporation Limited Warranty FCC Class B Statement FCC Declaration of Conformity