3Com 3CRWEASYA73 quick start

AC power

“Input” from Ethernet Hub/ Switch

Power LED indicator

“Output” to Bridge

3Insert the power cable plug directly into the standard AC socket on the power injector.

4Plug the other end of the power cable into a grounded, 3-pin socket, AC power source.

NOTE: For International use, you may need to change the AC line cord. You must use a line cord set that has been approved for the socket type in your country.

5Check the LED on top of the power injector to be sure that power is being supplied to the wireless bridge through the Ethernet connection.

10