NOTE: When you have connected external antennas, be sure to use the management interface to configure the bridge for correct antenna operation.
2.4 GHz | 5 GHz | 2.4 GHz |
5 GHz External
Antenna
2.4 GHz External
Omnidirectional
Antenna
RF Coaxial Cable
5 Connecting Cables
1
2
3
Attach the Ethernet cable to the Ethernet port on the wireless bridge.
For extra protection against rain or moisture, apply weatherproofing tape (not included) around the Ethernet connector.
Be sure to ground the unit with an appropriate grounding wire (not included) by attaching it to the grounding screw on the unit.
CAUTION: Be sure that grounding is available and that it meets local and national electrical codes. For additional lightning protection, use lightning rods, lightning arrestors, or surge suppressors.
8