Uninstalling the Drivers, Windows 95 Standard

MiniSCSI 1350 User’s Guide

Uninstalling the Drivers

To uninstall the MiniSCSI 1350 drivers from your system

1Go to the Control Panel and double-click on Add/Remove Programs icon.

2Highlight the MiniSCSI 1350 driver entry and click Add/Remove. The drivers will be removed from your system.

3Re-boot the system to reflect the change.

4Follow the instructions below to prevent the MiniSCSI 1350 from loading on bootup automatically. First, determine which version of Windows 95 you have installed. To do this check in the System Properties dialog box in the Control Panel. Windows 95 OSR2 will be displayed as Windows 95 4.00.950 B. Windows 95 Standard will be displayed as Windows 95 4.00.950.

Windows 95 Standard

a Go to the Control Panel and double-click on the System icon.

b Click the Device Manager tab.

c Double-click the MiniSCSI 1350 device entry under SCSI controllers.

d Uncheck the box next to Original Configuration in the Device Usage field. The MiniSCSI 1350 will not load. This can be verified by the red "X" that will be displayed alongside the MiniSCSI 1350 entry in the Device Manager.

Windows 95 OSR2

a Go to the Control Panel and double-click on the System icon.

b Click the Device Manager tab.

c Double-click the MiniSCSI 1350 device entry under SCSI controllers.

d Check the first box — Disable in this hardware profile. The MiniSCSI 1350 will not load. This can be verified by the red "X" that will be displayed alongside the MiniSCSI 1350 entry in the Device Manager.