6.For the first time installation, please click Network icon in Control Panel to add Protocols, Client and Service if you needed.
7.Reboot the machine and the card will be fully functional.
Installation for Windows Workgroup 3.11
NDIS3 Driver for Workgroup
1.Click on "Network Setup" icon in "Network" program group.
2.In "Network Settings" dialog box, click mouse on "Networks..." button to select the network operating system.
3.In "Networks" dialog box, check the radio button before "Install Microsoft Windows Network" and "No Additional Network".
Press OK to go back to the Network Settings screen.
4.Click on "Drivers..." button to select network driver.
5.In "Network Drivers" dialog box, press "Add Adapter..."button to enter "Add Network Adapter" dialog box. Select "Unlisted or Updated Network Adapter" and press OK.
6.Windows will prompt an "Install Driver" dialog box. In this time, put the software diskette into floppy drive and press OK.
7.Select the "Enhanced mode NDIS3 for...." string and press OK.
8.Follow Windows instructions to complete the
-9 -