Abocom LA100 Novell Client Installation, Run the \NWCLIENT\INSTALL.EXE in a previous installation

>LSL	; Link Support Layer Module
	provided by Novell
>LE100ODI ; Hardware Specific Module
>IPXODI	; IPX Protocol Stack Module
	provided by Novell
>NETx	; DOS Shell Support Module
	provided by Novell

>LOGIN

Novell Client Installation

1.Run the NetWare Client Install v1.21-

-Get the 4 Client disks from the network administrator or

-Run the \NWCLIENT\INSTALL.EXE in a previous installation

2.A message appears on the screen asking you whether or not you want the program to perform modifications on your

AUTOEXEC.BAT and CONFIG.SYS files.

3.Answer "Yes". The program then modifies your AUTOEXEC.BAT and CONFIG.SYS files accordingly and creates backup copies.

4.The following message appears:

-Install support for MS Windows? (Y/N):

5.Answer accordingly and provide a path if necessary.

6.The program displays the following:

Configure your workstation for

-15 -