Abocom WB2000 manual ~ Short The Short Preamble is intended for, Threshold, 2347, Select Shared

Preamble A preamble is a signal used in wireless environment to synchronize the

transmitting timing including Synchronization and Start frame delimiter. (Note: Please check the setting of AP first.)

~Auto Select Auto for the Network adapter to select the Preamble type automatically depending on the Access Point Preamble type.

~Long If in a "noisy" network environment,

Preamble the Preamble Type should be set to Long Preamble.

~Short The Short Preamble is intended for

Preamble applications where minimum overhead and maximum performance is desired. If in a "noisy" network environment, the performance would be decreased.

RTS	This value should remain at its default
Threshold	setting	of	2347.	Should	you
	encounter inconsistent data flow, only
	minor modifications of this value are
	recommended.
Select Shared	Select from 1, 2, 3, 4 or No selection.
key Index
Sharekey1	This setting is the configuration key
Sharekey2	used in accessing the wireless network
Sharekey3	via WEP encryption.
Sharekey4	Fill in the appropriate value/phrase.
SSID	SSID is the unique name shared
	among all points in your wireless
	network. It must be identical for all
	points	in	the network.		It is
	case-sensitive and must not exceed 32
	characters. Make sure that all points
	in the network are set the same.
WEP	WEP is a data privacy mechanism
	based on a 64 Bit/128 Bit shared key
	algorithm.
	Select WEP key 128bit or WEP key
	64bit to enable WEP encryption.
		- 14 -