Installing the Device

Automatically

If the Application setup in Installing the Utility section has been completed, follow below steps to install the device.

1.Locate the CardBus slot of your system.

2.Align the Wireless PC Card toward the CardBus slot. Push evenly and steadily until it is seated.

After the device has been connected to your computer, Windows will detect the new hardware and then automatically copy all of the files needed for networking.

For Windows 98 users: As you perform the installation, have your system operating CD-ROM at hand. You may be asked to insert the OS CD-ROM for the system to download a specific driver.

For Windows 2000 users: When Digital

Signature Not Found screen appears, click Yes to continue.

For Windows XP users:

1.Select Install the software automatically (Recommeded) and click Next.

2.Click Continue Anyway.

3.Click Finish to complete the installation.

-2 -