Abocom UTA128 manual Windows 98 Installation, Click Finish

Windows 98 Installation

1.Connect the rectangular end of the USB cable into the USB host port of your computer, and the square end into the USB port of your

network adapter. Windows 98 will automatically detect the device. Click Next to continue.

2.Select Search for the best driver for your device (Recommended) and click Next.

3.Insert the device driver into your CD-ROM drive. Select Specify a location, direct Windows 98 to the location where the driver stored and click Next. Windows 98 will search for the suitable driver for the software installation need.

4.Click Next. Windows 98 will start copying necessary files onto your system.

5.Click Next.

6.Select the switch protocol that your telephone company uses and click Next.

7.Enter the telephone numbers that your ISP provided and click Next.

8.Click Finish.

9.When asked to supply the original Windows 98 CD-ROM, you need to insert it into your compact disc drive. Click OK.

10.Click Finish to complete the software installation.

11.To verify if your network adapter exists in your computer and well enabled, you can perform the following steps.

- 4 -