Windows 2000 Installation

1.Connect the rectangular end of the USB cable into the USB host port of your computer, and the square end into the USB port of your network adapter. Windows 2000 will automatically detect the device. Click Next to continue.

2.Select Search for a suitable driver for my device (recommended) and click Next.

3.Select Specify a location and click Next.

4.Insert the device driver into your CD-ROM drive. Click Browse, direct Windows 2000 to the location where the driver stored and click OK.

5.Click Next. Windows 2000 will start copying necessary files onto your system.

6.Click Finish to complete the software installation.

7.To verify if your network adapter exists in your computer and well enabled, you can perform the following steps.

8.Go to Start, Settings, Control Panel, Hardware and then Device Manager.

9.Click Intelligent ISDN Drivers and Network adapters to expand. If Intelligent CAPI 2.0 driver, Intelligent USB adapter and Intelligent ISDN WAN miniport are found, that means your network adapter exists and enabled. If not, consult your distributor for technical support.

- 7 -