INSTALLATION
Precaution
Before the installation, make sure the USB port exists in your computer and is enabled. To check this, go to My ComputerÆControl PanelÆSystem. Open the Device Manager tab. If the Universal Serial Bus controller device is found, it means your USB port is installed and enabled. If not, either no USB port is installed or the USB bios is not properly enabled. In this case, consult your computer dealer for USB support.
Getting Hooked Up
1.Locate the USB host port of your system. Align the USB connector toward the USB host port, push evenly and steadily until it is seated.
- 3 -