Actiontec electronic 1394 manual Configuring Windows 2000 Professional

Page 12

Configuring Windows 2000 Professional

Step 1 After you have installed the PCI card in your com- puter, turn on the power and allow the system to boot normally.

Step 2 On the Windows desktop, right-click the icon for My Computer. On the menu that appears, click Proper- ties. The system properties dialog box will appear. Click the Hardware tab to bring it to the front, then click the Device Manager button.

Step 3 In Device Manager, click the plus (+) sign next to IEEE 1394 Bus Host Controller to expand that sec- tion of the listing. A listing for OHCI Compliant IEEE 1394 Host Controller should appear.

Note: Windows did not display anything when you started up your computer to acknowledge the fact that you had installed new hard- ware. This was because it recog- nized the modem as one corresponding with one of the generic drivers that come as part of Win- dows 2000, in this case the OHCI Compliant IEEE 1394 Host Controller driver. This proce- dure effectively tells Windows to use the Actiontec driver instead, which will allow you to take full advantage of the 1394 FireWire Card’s features and capabilities.

Configuring Windows 2000 Professional 11

Image 12
Contents Page Table of Contents Introduction Contacting Actiontec Technical SupportIntroduction Package Contents Before you Install the 1394 FireWire CardDo This First Minimum System RequirementsDo This First Installing the PCI Card Removing the Backplate Installing the PCI CardConnecting Devices to the Actiontec 1394 FireWire Card Configuring Windows Configuring Windows 98Configuring Windows Click NextConfiguring Windows 98 Checking the installation in Windows Configuring Windows 2000 Professional Configuring Windows 2000 ProfessionalConfiguring Windows 2000 Professional Configuring Windows 2000 Professional Configuring Windows 2000 Professional Checking the installation in Windows 2000 Professional FCC Regulations-Declaration of Conformity