Network Connection, Storage | Addonics Technologies NAS40ESU

Installation

Network Connection

The NAS unit is factory configured for dynamic IP addressing (DHCP client). Connect the unit to a network (router or switch) where DHCP is supported. Static IP may be assigned later after initial setup.

Storage

The NAS unit does not support FIS switching for port multipliers, therefore any eSATA devices must be a single drive or a RAID array. Also, through the use of USB hubs, up to a total of 16 physical storage devices may be connected, also counting any eSATA drives. One SATA port multiplier in JBOD mode may be connected using USB; however, with more than one such port multiplier connected only one will function – others will not be recognized at all.

Each physical unit may be formatted with up to 4 individual partitions using a Master Boot Record (MBR), or up to 15 individual partitions using a GUID Partition Table (GPT). Supported file systems are: FAT32, ext2, ext3, ext4, XFS, and NTFS. The NAS unit will by far provide the best performance when using the XFS file system.

NOTE: Initializing a drive with MBR is limited to drives less than 2TB in capacity with up to 4 partitions total. For drives greater than 2TB in capacity or if more than 4 partitions are desired, the drive must be initialized using a GPT boot record.

The NAS Unit Boot Process

Upon connecting power the unit, the status LED will blink at first between bright and dim, then remain dark for a few moments, then begin to blink between bright and dark for a while and finally settle down to glowing steadily. Once this pattern is complete the unit is ready to communicate.

This process normally takes about a minute or less, but may take longer depending on the complexity of the configuration, storage and LAN connections. With the 240 possible file systems, booting may take several minutes or longer.

Resetting the NAS

Should a problem arise with the NAS unit or its configuration, the unit may be reset simply by turning the unit off, then back on after a few moments. If this doesn't clear the problem, the unit may be returned to its factory configuration by gently pressing and holding the reset button between the power and LAN connectors until the Status LED blinks slowly, then rapidly. After releasing the Reset button while blinking slowly there will be no changes. After releasing the button once the Status LED blinks rapidly, the Status LED will continue to blink

www.addonics.com

Technical Support (M-F 8:30am - 6:00pm PST)

Phone: 408-453-6212

Email: www.addonics.com/support/query/

NAS40ESU specifications

Addonics Technologies has made substantial advancements in the realm of network-attached storage (NAS) solutions with the introduction of the NAS40ESU. This versatile device is engineered to meet the growing demands for secure and efficient data storage in small and medium-sized business environments as well as personal use.

One of the standout features of the NAS40ESU is its multi-bay design. It comes equipped with four drive bays, allowing users to install multiple hard drives for enhanced storage capacity. This modular approach provides a maximum storage space of up to 40TB, depending on the selected drives, making it suitable for extensive data archiving and backup purposes. The flexibility of the NAS40ESU extends to its compatibility with various drive types, allowing users to incorporate both SSDs and HDDs to optimize performance.

The NAS40ESU supports RAID configurations such as 0, 1, 5, 6, and 10, allowing users to customize their data protection strategies. With RAID support, users can achieve redundancy, improving data integrity and minimizing the risk of data loss. Additionally, the device features hot-swappable drive bays, enabling users to replace drives without downtime, which is crucial for businesses that need to ensure continuous operation.

Performance-wise, the NAS40ESU employs a high-speed Gigabit Ethernet connection, facilitating quick data transfer rates and making it an efficient option for file sharing across multiple devices. Equipped with a powerful processor and ample RAM, the system ensures smooth multitasking and efficient data handling, which is particularly important for environments with heavy workloads.

The NAS40ESU is designed with user-friendliness in mind, featuring a straightforward web-based user interface that simplifies configuration and management. Users can easily set up shared folders, manage access permissions, and monitor system health through this intuitive interface. Moreover, the device supports multiple network file protocols, including SMB/CIFS, FTP, and NFS, ensuring compatibility with different operating systems and devices.

Security is a cornerstone of the NAS40ESU’s design, with features that include encrypted data transmission and user authentication options. This ensures that sensitive data remains protected from unauthorized access, which is increasingly vital in today's digital landscape.

In summary, the Addonics Technologies NAS40ESU stands out as a robust and flexible network-attached storage solution. With its extensive storage capacity, versatile RAID options, high-speed connectivity, user-friendly interface, and strong security measures, it makes an excellent choice for anyone needing dependable and scalable storage solutions.